B1B0B Jeep Code - Passenger Airbag Squib 1 Circuit Shorted Together
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 1, Passenger Airbag Squib 1 harness is open or shorted, Passenger Airbag Squib 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0B Jeep indicates Passenger Airbag Squib 1 Circuit Shorted Together.
- Common causes
- Common causes include Faulty Passenger Airbag Squib 1, Passenger Airbag Squib 1 harness is open or shorted, Passenger Airbag Squib 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B0B Jeep Description
What are the Possible Causes of the DTC B1B0B Jeep?
- Faulty Passenger Airbag Squib 1
- Passenger Airbag Squib 1 harness is open or shorted
- Passenger Airbag Squib 1 circuit poor electrical connection
- Faulty Passenger Airbag
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B0B Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B0B Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B0B Jeep code?
Need more information on how to fix the B1B0B Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0B Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0B Jeep Code
1. What does the OBDII code B1B0B mean on a Jeep?
The code B1B0B indicates a fault in the passenger airbag squib 1 circuit, where the circuit is shorted together or has an electrical issue.
2. What are the symptoms of code B1B0B in a Jeep?
Common symptoms include the airbag warning light staying on, a disabled passenger airbag, or an error message on the dashboard.
3. What causes the B1B0B code to appear?
The code can be triggered by damaged wiring, a short circuit, a faulty passenger airbag squib, or a malfunctioning airbag control module.
4. Is it safe to drive with the B1B0B code active?
Driving with this code is not recommended, as it indicates an issue with the airbag system, which may not deploy properly in an accident.
5. How can I diagnose the B1B0B code?
Use an OBDII scanner to confirm the code, then inspect the airbag squib wiring, connectors, and related circuits for damage or loose connections.
6. What is a passenger airbag squib?
The passenger airbag squib is a device that ignites the airbag deployment system; it relies on proper electrical signals to function.
7. How do I fix the B1B0B code on a Jeep?
Repairs may involve repairing or replacing damaged wiring, tightening or reconnecting loose connectors, or replacing the faulty airbag squib or control module.
8. Can I reset the B1B0B code without repairing the issue?
Clearing the code without addressing the underlying problem will likely result in the code returning, as the fault persists.
9. How much does it cost to fix the B1B0B code?
Repair costs vary depending on the cause, but replacing wiring or connectors is typically less expensive than replacing the airbag control module or squib.
10. Do I need a professional mechanic to fix the B1B0B code?
Since the airbag system is a critical safety feature, it’s recommended to have a qualified mechanic diagnose and repair the issue to ensure proper functionality.
Discuss the causes and fixes for B1B0B Jeep OBDII Code
Code B1B0B Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
