B1B0B Dodge Code - Passenger Airbag Squib 1 Circuit Shorted Together
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 1, Passenger Airbag Squib 1 harness is open or shorted, Passenger Airbag Squib 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B0B Dodge indicates Passenger Airbag Squib 1 Circuit Shorted Together.
- Common causes
- Common causes include Faulty Passenger Airbag Squib 1, Passenger Airbag Squib 1 harness is open or shorted, Passenger Airbag Squib 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1B0B Dodge Description
What are the Possible Causes of the DTC B1B0B Dodge?
- Faulty Passenger Airbag Squib 1
- Passenger Airbag Squib 1 harness is open or shorted
- Passenger Airbag Squib 1 circuit poor electrical connection
- Faulty Passenger Airbag
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B1B0B Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1B0B Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1B0B Dodge code?
Need more information on how to fix the B1B0B Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B0B Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B0B Dodge Code
1. What does the OBDII code B1B0B mean for a Dodge vehicle?
Code B1B0B indicates a fault in the passenger airbag squib 1 circuit, specifically that the circuit is shorted together.
2. What are the symptoms of the B1B0B code in a Dodge?
Common symptoms include the airbag warning light illuminating on the dashboard and the passenger airbag potentially being disabled.
3. What causes the B1B0B code to appear?
This code is typically caused by damaged wiring, corroded connectors, a faulty airbag squib, or a short circuit in the passenger airbag system.
4. Can I drive my vehicle safely with the B1B0B code?
It is not recommended to drive with this code active, as it may indicate that the airbag system is compromised and may not deploy in an accident.
5. How do I diagnose the B1B0B code in my Dodge?
Start by inspecting the wiring and connectors related to the passenger airbag squib for damage or corrosion. Use a multimeter to check for continuity and shorts in the circuit.
6. What repairs are needed for the B1B0B code?
Repairs may include replacing damaged wiring, cleaning or replacing connectors, or replacing the passenger airbag squib if it is faulty.
7. How much does it cost to fix the B1B0B code?
Repair costs vary but can range from $100 to $500 depending on whether wiring, connectors, or the airbag squib itself needs replacement.
8. Can a blown fuse cause the B1B0B code?
While rare, a blown airbag system fuse can contribute to this issue, so checking the fuse is a good step during diagnosis.
9. Do I need to reset the airbag system after fixing the B1B0B code?
Yes, after completing repairs, use an OBDII scanner to clear the code and reset the airbag system.
10. Should I consult a professional for the B1B0B code?
Yes, since the airbag system is a critical safety component, it’s best to have a qualified technician diagnose and repair the issue to ensure proper functionality.
Discuss the causes and fixes for B1B0B Dodge OBDII Code
Code B1B0B Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
