AutoCodes – Generic – B1B09

B1B09 Code - Passenger Airbag Squib 1 Circuit High

Quick Answer

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Airbag Squib 1, Passenger Airbag Squib 1 harness is open or shorted, Passenger Airbag Squib 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1B09 indicates Passenger Airbag Squib 1 Circuit High.
Common causes: Common causes include Faulty Passenger Airbag Squib 1, Passenger Airbag Squib 1 harness is open or shorted, Passenger Airbag Squib 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,402

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1B09 Description

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a "floating" configuration at the module (connected to neither power nor ground), as protection against inadvertent deployment. The use of the SRS Load Tool Adapter provides a test point as well as a method for opening the shorting bar connections within the harness connector. The ORC sends out a 40 mA diagnostic current on each squib voltage supply circuit at power up and every 500 ms thereafter while the ignition is on.

OBDII Code B1B09 - Passenger Airbag Squib 1 Circuit High - AutoCodes.com — B1B09 Code - Passenger Airbag Squib 1 Circuit High

What does this mean?

What are the Possible Causes of the DTC B1B09?

Faulty Passenger Airbag Squib 1
Passenger Airbag Squib 1 harness is open or shorted
Passenger Airbag Squib 1 circuit poor electrical connection
Faulty Passenger Airbag
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1B09?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1B09 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1B09 code?

Need more information on how to fix the B1B09 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B09 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1B09 Chrysler — Passenger Airbag Squib 1 Circuit High
B1B09 Dodge — Passenger Airbag Squib 1 Circuit High
B1B09 Jeep — Passenger Airbag Squib 1 Circuit High
B1B09 Mitsubishi — Passenger Airbag Squib 1 Circuit High
B1B09 RAM — Passenger Airbag Squib 1 Circuit High

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B09 Code

1. What are the common symptoms of OBDII code B1B09?

- The common symptoms of OBDII code B1B09 (Passenger Airbag Squib 1 Circuit High) include the airbag warning light staying illuminated on the dashboard and potential non-deployment of the passenger airbag during a collision.

2. What are the possible causes of OBDII code B1B09?

- The possible causes of OBDII code B1B09 include a faulty passenger airbag squib circuit, a damaged squib connector, wiring issues, or a defective airbag control module.

3. How serious is OBDII code B1B09?

- OBDII code B1B09 is a serious issue as it involves the passenger airbag system. If this code is triggered, it means there may be a problem with the deployment of the passenger airbag in the event of a collision, potentially putting the passenger at risk.

4. Can I continue driving with OBDII code B1B09 present?

- It is not recommended to continue driving with OBDII code B1B09 present. The passenger airbag may not deploy as intended in case of an accident, compromising safety. It is advised to address this issue promptly.

5. How can I diagnose OBDII code B1B09?

- Diagnosing OBDII code B1B09 involves using a scan tool to retrieve the specific fault code, inspecting the passenger airbag squib and its wiring for any visible damage, and testing the airbag system components for proper functionality.

6. Are there any DIY repair tips for fixing OBDII code B1B09?

- DIY repair for OBDII code B1B09 is not recommended due to the complexity and safety implications of the airbag system. It is best to have a qualified mechanic or technician diagnose and repair this issue to ensure proper functioning of the passenger airbag.

7. How much does it typically cost to repair OBDII code B1B09?

- The cost of repairing OBDII code B1B09 can vary depending on the underlying cause of the issue. It may involve replacing the passenger airbag squib, repairing wiring or connectors, or addressing faults in the airbag control module. Costs can range from a few hundred to over a thousand dollars.

8. Can OBDII code B1B09 be triggered by a loose connection?

- Yes, OBDII code B1B09 can be triggered by a loose or poor connection in the passenger airbag squib circuit. It is essential to inspect all connections and wiring carefully during diagnosis to ensure a secure and proper connection.

9. Is it safe to reset the OBDII code B1B09 without fixing the underlying issue?

- It is not safe to simply reset OBDII code B1B09 without addressing the underlying problem. Resetting the code without fixing the issue may lead to continued malfunction of the passenger airbag system, potentially compromising the safety of vehicle occupants.

10. Can a damaged clock spring cause OBDII code B1B09 to appear?

- Yes, a damaged clock spring can potentially cause OBDII code B1B09 to appear. The clock spring is an essential component in the airbag system, and if it is faulty, it can impact the proper functioning of the passenger airbag squib circuit, triggering the code.