AutoCodesDodge – B1B06 Dodge

B1B06 Dodge Code - Driver Airbag Squib 2 Circuit Open

Quick Answer

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Driver Airbag Squib 2, Driver Airbag Squib 2 harness is open or shorted, Driver Airbag Squib 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1B06 Dodge indicates Driver Airbag Squib 2 Circuit Open.
Common causes
Common causes include Faulty Driver Airbag Squib 2, Driver Airbag Squib 2 harness is open or shorted, Driver Airbag Squib 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 13,527
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 14, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1B06 Dodge Description

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a "floating" configuration at the module (connected to neither power nor ground) as protection against inadvertent deployment. The use of the SRS Load Tool Adaptor provides a test point as well as a method for opening the shorting bar connections within the harness connector. The Clockspring is part of the Steering Column Control Module (SCCM). The SCCM includes the steering column shroud, the Steering Angle Sensor (SAS), the Clockspring, the Multi-function Switch, a Steering Column Power Tilt and Telescope Switch (if equipped), and a trim cover. The SCCM is replaced as an entire assembly. The ORC sends out a 40 mA diagnostic current on each squib voltage supply circuit at power up and every 500 ms thereafter while the ignition is on.
OBDII Code B1B06 Dodge - Driver Airbag Squib 2 Circuit Open - AutoCodes.com
B1B06 Dodge Code - Driver Airbag Squib 2 Circuit Open

What are the Possible Causes of the DTC B1B06 Dodge?

  • Faulty Driver Airbag Squib 2
  • Driver Airbag Squib 2 harness is open or shorted
  • Driver Airbag Squib 2 circuit poor electrical connection
  • Faulty Driver Airbag
  • Faulty Steering Comun Control Module (Clockspring)
  • Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1B06 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1B06 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1B06 Dodge code?

Need more information on how to fix the B1B06 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B06 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B06 Dodge Code

1. What does OBDII code B1B06 for Dodge indicate?

The B1B06 code for Dodge specifically refers to the Driver Airbag Squib 2 Circuit Open, signaling an issue with the electrical circuit of the driver's airbag.

2. What are the common symptoms of OBDII code B1B06 in a Dodge vehicle?

Common symptoms of the B1B06 code in a Dodge may include an illuminated airbag warning light on the dashboard, non-functional driver's airbag, and potentially a stored diagnostic trouble code.

3. What are the possible causes of the Driver Airbag Squib 2 Circuit Open in a Dodge?

Potential causes of the B1B06 code in a Dodge include damaged wiring or connectors in the airbag system, a faulty clock spring, a defective airbag squib, or a problem with the airbag control module.

4. How can I diagnose the B1B06 code in my Dodge?

Diagnosing the B1B06 code typically involves using an OBDII scanner to retrieve the specific trouble code, inspecting the airbag system wiring and connectors for damage, and testing the components involved in the driver's airbag circuit.

5. Is it safe to drive my Dodge with the B1B06 code present?

It is not recommended to drive your Dodge with the B1B06 code active, as it indicates a potential issue with the driver's airbag system, which is a critical safety component in the event of a collision.

6. Can I repair the Driver Airbag Squib 2 Circuit Open issue in my Dodge myself?

Repairing the B1B06 code in a Dodge may require advanced knowledge and tools due to the sensitivity of airbag systems. It is recommended to seek assistance from a qualified mechanic or dealership for proper diagnosis and repair.

7. What are some tips for preventing the B1B06 code from recurring in my Dodge?

To prevent the reoccurrence of the Driver Airbag Squib 2 Circuit Open issue, ensure proper handling of the airbag system components during repairs or maintenance, and address any wiring or connector issues promptly.

8. How much does it typically cost to repair the B1B06 code in a Dodge?

The cost of repairing the B1B06 code in a Dodge can vary depending on the specific cause of the issue, the labor rates of the repair shop, and the cost of any replacement parts needed.

9. Can the B1B06 code be cleared/reset without fixing the underlying issue in a Dodge?

While it is possible to clear/reset the B1B06 code using an OBDII scanner, it is not recommended to do so without addressing the root cause, as it may pose a safety risk in the event of an accident.

10. How long does it usually take to repair the Driver Airbag Squib 2 Circuit Open problem in a Dodge?

The repair time for the B1B06 code in a Dodge can vary depending on the complexity of the issue and the availability of parts. It is best to consult with a professional technician for an accurate estimate.

Discuss the causes and fixes for B1B06 Dodge OBDII Code

Code B1B06 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play