AutoCodesRAM – B19F5 RAM

B19F5 RAM Code - Right Power Sliding Door Latch Control 2 Circuit Open

Quick Answer

When the voltage drop across the Right Power Sliding Door Latch Cinch/Release motor circuit is below a calibrated value, this code will set. Common causes include Faulty Right Cinch/Release Motor Latch, Right Cinch/Release Motor Latch harness is open or shorted, Right Cinch/Release Motor Latch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B19F5 RAM indicates Right Power Sliding Door Latch Control 2 Circuit Open.
Common causes
Common causes include Faulty Right Cinch/Release Motor Latch, Right Cinch/Release Motor Latch harness is open or shorted, Right Cinch/Release Motor Latch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 576
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 05, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19F5 RAM Description

When the voltage drop across the Right Power Sliding Door Latch Cinch/Release motor circuit is below a calibrated value, this code will set.
OBDII Code B19F5 RAM - Right Power Sliding Door Latch Control 2 Circuit Open - AutoCodes.com
B19F5 RAM Code - Right Power Sliding Door Latch Control 2 Circuit Open

What are the Possible Causes of the DTC B19F5 RAM?

  • Faulty Right Cinch/Release Motor Latch
  • Right Cinch/Release Motor Latch harness is open or shorted
  • Right Cinch/Release Motor Latch circuit poor electrical connection
  • Faulty Right Rear Door Latch Assembly
  • Faulty Right Rear Door Module

How to Fix the DTC B19F5 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19F5 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19F5 RAM code?

Need more information on how to fix the B19F5 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19F5 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19F5 RAM Code

1. What does the OBDII code B19F5 mean?

The B19F5 code indicates an open circuit issue in the Right Power Sliding Door Latch Control 2, meaning the latch control isn't receiving the proper electrical signal.

2. What are the symptoms of the B19F5 code?

Symptoms may include the right power sliding door not latching properly, failure to close or open automatically, and possible warning lights or chimes.

3. What causes the B19F5 code to appear?

Common causes include damaged wiring, a faulty latch control motor, disconnected connectors, or a malfunctioning door control module.

4. How can I diagnose the B19F5 code?

Start by inspecting the wiring and connectors for damage or disconnection, then use a multimeter to check for continuity in the Right Power Sliding Door Latch Control 2 circuit.

5. Can the B19F5 code cause other problems?

Yes, if unresolved, it can lead to further damage to the door mechanism or motor and may compromise the door's safety during operation.

6. How do I fix the B19F5 code?

Repairs may involve reconnecting or replacing damaged wires, repairing connectors, or replacing the latch mechanism or door control module if faulty.

7. Is it safe to drive with the B19F5 code?

While the vehicle is generally safe to drive, the power sliding door may not function properly, potentially causing inconvenience or safety concerns.

8. What tools are needed to fix the B19F5 code?

You’ll need a diagnostic scanner, a multimeter, and basic tools for accessing and repairing the door’s electrical components.

9. How much does it cost to repair the B19F5 code?

Repair costs can vary, ranging from $50 to $500, depending on whether it’s a simple wiring repair or a full replacement of the latch mechanism.

10. Can I clear the B19F5 code without fixing the problem?

Clearing the code without addressing the issue will only temporarily remove it, as the code will reappear if the underlying problem persists.

Discuss the causes and fixes for B19F5 RAM OBDII Code

Code B19F5 RAM comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play