B19F4 Chrysler Code - Right Power Sliding Door Latch Control 2 Circuit High
Quick Answer
When the Right Power Sliding Door Latch Motor Cinch/Release output is pulled high prior to or during a latch cinch or release operation for over 100ms, this code will set. Common causes include Faulty Right Cinch/Release Motor Latch, Right Cinch/Release Motor Latch harness is open or shorted, Right Cinch/Release Motor Latch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19F4 Chrysler indicates Right Power Sliding Door Latch Control 2 Circuit High.
- Common causes
- Common causes include Faulty Right Cinch/Release Motor Latch, Right Cinch/Release Motor Latch harness is open or shorted, Right Cinch/Release Motor Latch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19F4 Chrysler Description
What are the Possible Causes of the DTC B19F4 Chrysler?
- Faulty Right Cinch/Release Motor Latch
- Right Cinch/Release Motor Latch harness is open or shorted
- Right Cinch/Release Motor Latch circuit poor electrical connection
- Faulty Right Rear Door Latch Assembly
- Faulty Right Rear Door Module
How to Fix the DTC B19F4 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19F4 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19F4 Chrysler code?
Need more information on how to fix the B19F4 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19F4 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19F4 Chrysler Code
1. What does the OBDII code B19F4 mean on a Chrysler?
The code B19F4 indicates a "Right Power Sliding Door Latch Control 2 Circuit High," meaning there is an electrical issue with the circuitry controlling the right sliding door latch.
2. What are the common symptoms of a B19F4 code?
Symptoms may include the right power sliding door not latching properly, the door failing to open or close electronically, or a warning light on the dashboard.
3. What causes the B19F4 code to appear?
Common causes include a faulty door latch actuator, damaged wiring or connectors in the latch circuit, or a malfunctioning power sliding door control module.
4. Can a weak battery trigger the B19F4 code?
Yes, a weak or failing battery can cause electrical issues, including triggering the B19F4 code, as the door system relies on proper voltage.
5. How do you diagnose the B19F4 code?
Diagnosis involves inspecting the wiring and connectors for damage, testing the door latch actuator, and using a diagnostic scanner to monitor voltage and resistance in the circuit.
6. Is the B19F4 code serious?
While it may not affect drivability, it can impact the functionality of the sliding door, which could be inconvenient or a safety concern if the door doesn’t secure properly.
7. How can the B19F4 code be repaired?
Repairs may include replacing the door latch actuator, repairing damaged wiring or connectors, or reprogramming or replacing the power sliding door control module.
8. Can I fix the B19F4 code myself?
If you have experience with electrical systems and access to a diagnostic scanner, you may be able to repair minor wiring issues or replace the actuator. Otherwise, it’s best to consult a professional.
9. How much does it cost to repair a B19F4 code?
Repair costs can vary, but replacing a door latch actuator typically ranges from $200 to $500, depending on parts and labor.
10. Will clearing the B19F4 code with a scanner fix the problem?
Clearing the code will remove it temporarily, but if the underlying issue isn’t resolved, the code will return.
Discuss the causes and fixes for B19F4 Chrysler OBDII Code
Code B19F4 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
