B19F3 Jeep Code - Right Power Sliding Door Latch Control 2 Circuit Low
Quick Answer
When the Right Power Sliding Door Latch motor cinch or release output is pulled low prior to or during a latch cinch or release operation for more than 100ms, this code will set. Common causes include Binding Latch, Faulty Right Cinch/Release Motor Latch, Right Cinch/Release Motor Latch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19F3 Jeep indicates Right Power Sliding Door Latch Control 2 Circuit Low.
- Common causes
- Common causes include Binding Latch, Faulty Right Cinch/Release Motor Latch, Right Cinch/Release Motor Latch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19F3 Jeep Description
What are the Possible Causes of the DTC B19F3 Jeep?
- Binding Latch
- Faulty Right Cinch/Release Motor Latch
- Right Cinch/Release Motor Latch harness is open or shorted
- Right Cinch/Release Motor Latch circuit poor electrical connection
- Faulty Right Rear Door Latch Assembly
- Faulty Right Rear Door Module
How to Fix the DTC B19F3 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19F3 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19F3 Jeep code?
Need more information on how to fix the B19F3 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19F3 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19F3 Jeep Code
1. What are the common symptoms of OBDII code B19F3 in a Jeep related to the Right Power Sliding Door Latch Control 2 Circuit Low?
The common symptoms include difficulty opening or closing the right power sliding door, intermittent operation of the door, and the door not latching properly.
2. What could cause the OBDII code B19F3 in a Jeep indicating Right Power Sliding Door Latch Control 2 Circuit Low?
Possible causes of this code include a faulty power sliding door latch, damaged wiring or connectors in the latch control circuit, or a malfunctioning control module.
3. How can I diagnose the OBDII code B19F3 on my Jeep for the Right Power Sliding Door Latch Control 2 Circuit Low?
Diagnosing this code involves checking the wiring and connectors related to the power sliding door latch, testing the latch itself for proper functioning, and using a diagnostic scan tool to identify the specific issue.
4. What are some repair tips for fixing the OBDII code B19F3 in a Jeep related to the Right Power Sliding Door Latch Control 2 Circuit Low?
Repair tips include inspecting and repairing any damaged wiring or connectors, replacing the faulty power sliding door latch if necessary, and resetting the control module after the repair is completed.
5. Can I drive my Jeep with the OBDII code B19F3 indicating Right Power Sliding Door Latch Control 2 Circuit Low?
It is not recommended to drive your Jeep with this code active, as it can lead to further issues with the power sliding door operation and potentially compromise safety.
6. How much does it typically cost to repair the OBDII code B19F3 in a Jeep for the Right Power Sliding Door Latch Control 2 Circuit Low?
The cost of repair can vary depending on the specific issue causing the code, but it may involve expenses for parts, labor, and diagnostic services from a qualified technician.
7. Is it possible to reset the OBDII code B19F3 in a Jeep myself after fixing the issue with the Right Power Sliding Door Latch Control 2 Circuit Low?
Yes, you can reset the code yourself using a diagnostic scan tool or by disconnecting the vehicle's battery for a few minutes to clear the error code from the system.
8. Are there any preventive measures to avoid encountering the OBDII code B19F3 in a Jeep related to the Right Power Sliding Door Latch Control 2 Circuit Low?
Regularly inspecting the power sliding door components, keeping the latch mechanism clean and well-lubricated, and addressing any minor issues promptly can help prevent this code from occurring.
9. Can extreme weather conditions affect the likelihood of triggering the OBDII code B19F3 in a Jeep for the Right Power Sliding Door Latch Control 2 Circuit Low?
Extreme temperatures or exposure to moisture can potentially impact the operation of the power sliding door system and increase the risk of issues leading to this specific error code.
10. How long does it typically take to repair the OBDII code B19F3 in a Jeep associated with the Right Power Sliding Door Latch Control 2 Circuit Low?
The repair time can vary depending on the complexity of the issue and the availability of parts, but it may take a few hours to a full day to diagnose and resolve the problem effectively.
Discuss the causes and fixes for B19F3 Jeep OBDII Code
Code B19F3 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
