B19EB Jeep Code - Left Power Sliding Door Latch Control 2 Circuit Low
Quick Answer
When the Left Power Sliding Door Latch motor cinch or release output is pulled low prior to or during a latch cinch or release operation, this code will set. Common causes include Binding Latch, Faulty Left Cinch/Release Motor Latch, Left Cinch/Release Motor Latch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19EB Jeep indicates Left Power Sliding Door Latch Control 2 Circuit Low.
- Common causes
- Common causes include Binding Latch, Faulty Left Cinch/Release Motor Latch, Left Cinch/Release Motor Latch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19EB Jeep Description
What are the Possible Causes of the DTC B19EB Jeep?
- Binding Latch
- Faulty Left Cinch/Release Motor Latch
- Left Cinch/Release Motor Latch harness is open or shorted
- Left Cinch/Release Motor Latch circuit poor electrical connection
- Faulty Left Rear Door Latch Assembly
- Faulty Left Rear Door Module
How to Fix the DTC B19EB Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19EB Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19EB Jeep code?
Need more information on how to fix the B19EB Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19EB Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19EB Jeep Code
1. What are the common symptoms of OBDII code B19EB in a Jeep related to the Left Power Sliding Door Latch Control 2 Circuit Low?
- Common symptoms may include difficulty opening or closing the left power sliding door, intermittent issues with the door latch, and a warning light on the dashboard.
2. What can cause the OBDII code B19EB in a Jeep indicating Left Power Sliding Door Latch Control 2 Circuit Low?
- Potential causes can include a faulty door latch actuator, damaged wiring or connectors in the latch control circuit, or a malfunctioning control module.
3. How can I diagnose the issue associated with OBDII code B19EB in a Jeep's left power sliding door latch control circuit?
- Diagnosing the problem may involve conducting a visual inspection of the wiring and connectors, testing the door latch actuator, and using a scan tool to retrieve specific error codes.
4. Are there any DIY repair tips for addressing the B19EB code in a Jeep's left power sliding door latch control circuit?
- DIY repair tips may include checking and repairing any damaged wiring or connectors, replacing the faulty door latch actuator, and resetting the control module after making repairs.
5. Can I continue to drive my Jeep with the OBDII code B19EB related to the Left Power Sliding Door Latch Control 2 Circuit Low?
- While the vehicle may still be operable with this code, it is recommended to address the issue promptly to prevent potential safety hazards or further damage to the door mechanism.
6. How much can I expect to pay for professional repairs for the OBDII code B19EB in a Jeep's left power sliding door latch control circuit?
- The cost of professional repairs can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars, including parts and labor.
7. Will resetting the OBDII code B19EB in a Jeep's left power sliding door latch control circuit make the problem go away?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the code to appear. Proper diagnosis and repairs are necessary.
8. Is it safe to manually operate the left power sliding door in a Jeep experiencing the OBDII code B19EB related to the latch control circuit?
- It is generally safe to manually operate the door, but caution should be exercised to avoid potential injuries or further damage to the latch mechanism until the issue is resolved.
9. Can extreme weather conditions or moisture affect the occurrence of OBDII code B19EB in a Jeep's left power sliding door latch control circuit?
- Yes, extreme weather conditions or moisture can sometimes exacerbate electrical issues in the door latch control circuit, leading to the appearance of this code.
10. How long does it typically take to repair the OBDII code B19EB in a Jeep's left power sliding door latch control circuit?
- The repair time can vary based on the complexity of the issue and the availability of parts, but it may take a few hours to a full day for a professional technician to diagnose and fix the problem.
Discuss the causes and fixes for B19EB Jeep OBDII Code
Code B19EB Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
