B19E9 Chrysler Code - Left Power Sliding Door Latch Control 1 Circuit Open
Quick Answer
This code will set when the Left Rear Door Module senses no current on the Latch Cinch/Release circuit during a Cinch/Release operation for more than 100ms. Common causes include Faulty Left Cinch/Release Motor Latch, Left Cinch/Release Motor Latch harness is open or shorted, Left Cinch/Release Motor Latch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19E9 Chrysler indicates Left Power Sliding Door Latch Control 1 Circuit Open.
- Common causes
- Common causes include Faulty Left Cinch/Release Motor Latch, Left Cinch/Release Motor Latch harness is open or shorted, Left Cinch/Release Motor Latch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19E9 Chrysler Description
What are the Possible Causes of the DTC B19E9 Chrysler?
- Faulty Left Cinch/Release Motor Latch
- Left Cinch/Release Motor Latch harness is open or shorted
- Left Cinch/Release Motor Latch circuit poor electrical connection
- Faulty Left Rear Door Latch Assembly
- Faulty Left Rear Door Module
How to Fix the DTC B19E9 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19E9 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19E9 Chrysler code?
Need more information on how to fix the B19E9 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19E9 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19E9 Chrysler Code
1. What are common symptoms of OBDII code B19E9 in Chrysler vehicles?
- Common symptoms include the left power sliding door not opening or closing properly, an illuminated door ajar warning light on the dashboard, and intermittent issues with the power door latch.
2. What does the OBDII code B19E9 Chrysler indicate?
- The code B19E9 indicates a fault with the Left Power Sliding Door Latch Control 1 Circuit being open, affecting the operation of the power sliding door on the left side of the vehicle.
3. What are possible causes of the Left Power Sliding Door Latch Control 1 Circuit Open code?
- Possible causes include a faulty power sliding door latch assembly, damaged wiring or connectors in the latch control circuit, or a malfunctioning control module.
4. How can I diagnose the cause of the B19E9 code in my Chrysler?
- To diagnose the issue, you can perform a visual inspection of the door latch components and wiring, use a multimeter to test for continuity and voltage in the circuit, and scan the vehicle with an OBDII scanner for additional error codes.
5. Is it safe to continue driving with the B19E9 code present?
- It is not recommended to continue driving with the B19E9 code active, as it can lead to potential safety hazards if the power sliding door fails to operate correctly, especially in emergency situations.
6. Can I repair the Left Power Sliding Door Latch Control 1 Circuit issue myself?
- Depending on your level of automotive expertise, you may be able to repair the issue yourself by replacing the faulty latch assembly, repairing damaged wiring, or resetting the control module. However, professional assistance is recommended for accurate diagnosis and repair.
7. How much does it typically cost to repair the B19E9 code in a Chrysler vehicle?
- The cost of repairing the B19E9 code can vary depending on the specific cause of the issue, parts needed for replacement, and labor charges. It is advisable to obtain quotes from trusted automotive repair shops for an accurate estimate.
8. Can resetting the vehicle's computer clear the B19E9 code?
- Resetting the vehicle's computer may temporarily clear the B19E9 code, but if the underlying issue with the Left Power Sliding Door Latch Control 1 Circuit remains unresolved, the code is likely to reappear once the system detects the fault again.
9. Are there any preventive maintenance steps to avoid the B19E9 code in Chrysler vehicles?
- Regularly inspecting the power sliding door components, keeping them clean and well-lubricated, and addressing any unusual noises or malfunctions promptly can help prevent issues that may trigger the B19E9 code.
10. Can the B19E9 code affect other electrical systems in the vehicle?
- While the B19E9 code specifically relates to the Left Power Sliding Door Latch Control 1 Circuit, electrical issues in one part of the vehicle can sometimes cause disruptions or faults in other systems. Monitoring for any additional warning lights or symptoms is advisable.
Discuss the causes and fixes for B19E9 Chrysler OBDII Code
Code B19E9 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
