B19E7 Jeep Code - Left Power Sliding Door Latch Control 1 Circuit Low
Quick Answer
When the Left Power Sliding Door Latch motor cinch or release output is pulled low prior to or during a latch cinch or release operation, this code will set. Common causes include Binding Latch, Faulty Left Cinch/Release Motor Latch, Left Cinch/Release Motor Latch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19E7 Jeep indicates Left Power Sliding Door Latch Control 1 Circuit Low.
- Common causes
- Common causes include Binding Latch, Faulty Left Cinch/Release Motor Latch, Left Cinch/Release Motor Latch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19E7 Jeep Description
What are the Possible Causes of the DTC B19E7 Jeep?
- Binding Latch
- Faulty Left Cinch/Release Motor Latch
- Left Cinch/Release Motor Latch harness is open or shorted
- Left Cinch/Release Motor Latch circuit poor electrical connection
- Faulty Left Rear Door Latch Assembly
- Faulty Left Rear Door Module
How to Fix the DTC B19E7 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19E7 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19E7 Jeep code?
Need more information on how to fix the B19E7 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19E7 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19E7 Jeep Code
1. What are the common symptoms of OBDII code B19E7 in a Jeep related to the Left Power Sliding Door Latch Control 1 Circuit Low?
The common symptoms include difficulty opening or closing the left power sliding door, intermittent power door operation, and an illuminated malfunction indicator light.
2. What could be the possible causes of OBDII code B19E7 in a Jeep?
Possible causes of this code may include a faulty power sliding door latch, damaged wiring or connectors, a malfunctioning control module, or a communication issue within the door system.
3. How can I diagnose the OBDII code B19E7 in a Jeep related to the Left Power Sliding Door Latch Control 1 Circuit Low?
Diagnosing this code may involve using a diagnostic scanner to retrieve the specific fault codes, conducting a visual inspection of the door latch and wiring, and testing the components within the power sliding door system.
4. Are there any simple repair tips for fixing OBDII code B19E7 in a Jeep?
Simple repair tips may include checking and repairing any damaged wiring or connectors, ensuring proper alignment and operation of the power sliding door, and resetting the control module after making repairs.
5. Can I drive my Jeep with the OBDII code B19E7 related to the Left Power Sliding Door Latch Control 1 Circuit Low?
It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to avoid potential inconvenience or safety concerns associated with the power sliding door functionality.
6. How much does it typically cost to repair OBDII code B19E7 in a Jeep?
The cost of repairing this code can vary depending on the exact cause of the issue, the labor rates of the repair shop, and the cost of any replacement parts that may be needed. It is advisable to obtain quotes from different mechanics or dealerships.
7. Can I reset the OBDII code B19E7 in a Jeep myself?
You can attempt to reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, it is important to address the underlying issue causing the code to prevent it from reoccurring.
8. Is it necessary to replace the entire power sliding door assembly for OBDII code B19E7 in a Jeep?
In some cases, only specific components such as the latch or wiring may need to be replaced to resolve the issue. It is recommended to diagnose the problem accurately before deciding on any replacements.
9. Are there any recalls or technical service bulletins related to OBDII code B19E7 in Jeep vehicles?
It is advisable to check with the manufacturer or a certified Jeep dealership for any recalls or technical service bulletins related to this specific OBDII code, as there may be relevant information or repair instructions available.
10. How can I prevent OBDII code B19E7 from occurring in my Jeep in the future?
Regularly inspecting and maintaining the power sliding door components, addressing any issues promptly, and following the manufacturer's recommended maintenance schedule can help prevent the recurrence of this OBDII code in the future.
Discuss the causes and fixes for B19E7 Jeep OBDII Code
Code B19E7 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
