B19E5 Chrysler Code - Right Sliding Door Handle Switch Circuit Stuck
Quick Answer
The Right Rear Door Module has detected the Right Door In/Out Handle Switch Sense circuit voltage is below 3.2 volts for over 30 seconds. Common causes include Right Outside or Inside Door Handle Sticking, Faulty Right Door In/Out Handle Switch Sense, Right Door In/Out Handle Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19E5 Chrysler indicates Right Sliding Door Handle Switch Circuit Stuck.
- Common causes
- Common causes include Right Outside or Inside Door Handle Sticking, Faulty Right Door In/Out Handle Switch Sense, Right Door In/Out Handle Switch Sense harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19E5 Chrysler Description
What are the Possible Causes of the DTC B19E5 Chrysler?
- Right Outside or Inside Door Handle Sticking
- Faulty Right Door In/Out Handle Switch Sense
- Right Door In/Out Handle Switch Sense harness is open or shorted
- Right Door In/Out Handle Switch Sense circuit poor electrical connection
- Right Rear Door Module
How to Fix the DTC B19E5 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19E5 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19E5 Chrysler code?
Need more information on how to fix the B19E5 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19E5 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19E5 Chrysler Code
1. What are the common symptoms of OBDII code B19E5 in a Chrysler related to the right sliding door handle switch circuit?
The common symptoms include the right sliding door handle switch not functioning properly, the door not unlocking or locking properly, and the interior lights not turning on when the door is opened.
2. What are the possible causes of OBDII code B19E5 in a Chrysler?
Possible causes include a faulty sliding door handle switch, damaged wiring or connectors in the circuit, a malfunctioning control module, or a problem with the door latch mechanism.
3. How can I diagnose the issue causing OBDII code B19E5 in my Chrysler?
To diagnose the issue, you can use a diagnostic scanner to read the code, visually inspect the sliding door handle switch and its wiring, test the switch for continuity, and check for any loose or damaged connections in the circuit.
4. Can I still drive my Chrysler with OBDII code B19E5 present?
It is generally safe to drive your Chrysler with this code, but it is recommended to address the issue promptly to avoid potential inconvenience or safety concerns related to the sliding door not functioning correctly.
5. How can I repair OBDII code B19E5 in my Chrysler?
Repair options include replacing the faulty sliding door handle switch, repairing or replacing damaged wiring or connectors, resetting the control module, or addressing any issues with the door latch mechanism.
6. Is it possible to reset OBDII code B19E5 in a Chrysler without fixing the underlying issue?
While you can clear the code using a diagnostic scanner, it is important to address the root cause of the problem to prevent the code from reappearing and ensure proper function of the sliding door handle switch.
7. Can extreme weather conditions cause OBDII code B19E5 to trigger in a Chrysler?
Extreme temperatures or moisture can sometimes affect the functionality of the sliding door handle switch circuit, leading to the code being triggered. It is important to keep the door components well-maintained to prevent such issues.
8. Are there any preventive maintenance tips to avoid OBDII code B19E5 in a Chrysler?
Regularly inspecting and cleaning the sliding door handle switch, checking for any signs of wear or damage in the circuit, and addressing any issues promptly can help prevent the code from appearing.
9. How long does it typically take to repair OBDII code B19E5 in a Chrysler?
The repair time can vary depending on the exact cause of the issue and the complexity of the repair needed. It is advisable to consult a professional technician for an accurate assessment and repair timeline.
10. Can OBDII code B19E5 in a Chrysler affect other vehicle systems or components?
While this code is specific to the right sliding door handle switch circuit, unresolved issues with the door mechanism can potentially impact other systems like the interior lights, door locks, and overall convenience features of the vehicle.
Discuss the causes and fixes for B19E5 Chrysler OBDII Code
Code B19E5 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
