B19E3 Dodge Code - Right Sliding Door Handle Circuit Low
Quick Answer
The Right Rear Door Module has detected the Right Door In/Out Handle Switch Sense circuit voltage is below 0.5 of volt for over one second. Common causes include Faulty Right Door In/Out Handle Switch Sense, Right Door In/Out Handle Switch Sense harness is open or shorted, Right Door In/Out Handle Switch Sense circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19E3 Dodge indicates Right Sliding Door Handle Circuit Low.
- Common causes
- Common causes include Faulty Right Door In/Out Handle Switch Sense, Right Door In/Out Handle Switch Sense harness is open or shorted, Right Door In/Out Handle Switch Sense circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19E3 Dodge Description
What are the Possible Causes of the DTC B19E3 Dodge?
- Faulty Right Door In/Out Handle Switch Sense
- Right Door In/Out Handle Switch Sense harness is open or shorted
- Right Door In/Out Handle Switch Sense circuit poor electrical connection
- Faulty Right Rear Door Latch Assembly
- Right Rear Door Module
How to Fix the DTC B19E3 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19E3 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19E3 Dodge code?
Need more information on how to fix the B19E3 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19E3 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19E3 Dodge Code
1. What are the common symptoms of OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low)?
- The common symptoms include difficulty opening or closing the right sliding door, malfunctioning door handle, and illuminated dashboard warning lights.
2. What are the possible causes of OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low)?
- Possible causes include a faulty door handle assembly, damaged wiring or connectors, a malfunctioning control module, or a loose connection.
3. How can I diagnose the issue related to OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low)?
- Diagnose the issue by visually inspecting the door handle, wiring, and connectors for any visible damage. Using a multimeter, test the electrical continuity and resistance in the circuit.
4. What are some repair tips for fixing OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low)?
- Repair tips include checking and repairing any damaged wiring or connectors, replacing the faulty door handle assembly, resetting the control module, and ensuring all connections are secure.
5. Can I reset the OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low) myself?
- Yes, you can attempt to reset the code by disconnecting the vehicle's battery for a few minutes and then reconnecting it. However, it is recommended to diagnose and repair the underlying issue to prevent the code from returning.
6. Is it safe to continue driving with OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low) present?
- It is not recommended to continue driving with this code present, as it may affect the proper functioning of the right sliding door and compromise safety. Address the issue promptly to ensure the door operates correctly.
7. How much does it typically cost to repair OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low)?
- The cost of repair can vary depending on the specific cause of the issue and the labor rates in your area. It is advisable to consult a professional mechanic for an accurate estimate.
8. What steps should I take if the OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low) keeps coming back after resetting?
- If the code keeps recurring after resetting, it indicates a persistent issue that requires further diagnosis and repair. Consult a qualified mechanic to identify and address the underlying problem.
9. Can extreme weather conditions contribute to triggering OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low)?
- Yes, extreme weather conditions such as excessive heat or moisture can potentially cause electrical components to malfunction, leading to the triggering of this OBDII code.
10. Is it possible to prevent OBDII code B19E3 Dodge (Right Sliding Door Handle Circuit Low) from occurring in the future?
- Regular maintenance, keeping the door handle and surrounding components clean and well-maintained, and addressing any issues promptly can help prevent the recurrence of this OBDII code.
Discuss the causes and fixes for B19E3 Dodge OBDII Code
Code B19E3 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
