AutoCodes – Chrysler – B19E0 Chrysler

B19E0 Chrysler Code - Left Sliding Door Handle Switch Circuit Stuck

Quick Answer

The Left Rear Door Module has detected the Left Door In/Out Handle Switch Sense circuit voltage is below 3.2 volts for over 30 seconds. Common causes include Left Outside or Inside Door Handle Sticking, Faulty Left Door In/Out Handle Switch Sense, Left Door In/Out Handle Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19E0 Chrysler indicates Left Sliding Door Handle Switch Circuit Stuck.
Common causes: Common causes include Left Outside or Inside Door Handle Sticking, Faulty Left Door In/Out Handle Switch Sense, Left Door In/Out Handle Switch Sense harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,808

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19E0 Chrysler Description

The Left Rear Door Module has detected the Left Door In/Out Handle Switch Sense circuit voltage is below 3.2 volts for over 30 seconds.

OBDII Code B19E0 Chrysler - Left Sliding Door Handle Switch Circuit Stuck - AutoCodes.com — B19E0 Chrysler Code - Left Sliding Door Handle Switch Circuit Stuck

What does this mean?

What are the Possible Causes of the DTC B19E0 Chrysler?

Left Outside or Inside Door Handle Sticking
Faulty Left Door In/Out Handle Switch Sense
Left Door In/Out Handle Switch Sense harness is open or shorted
Left Door In/Out Handle Switch Sense circuit poor electrical connection
Left Rear Door Module

How to Fix the DTC B19E0 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19E0 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19E0 Chrysler code?

Need more information on how to fix the B19E0 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19E0 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19E0 Chrysler Code

1. What are the common symptoms of OBDII code B19E0 in a Chrysler related to the Left Sliding Door Handle Switch Circuit Stuck?

The common symptoms include the inability to open or close the left sliding door using the handle switch, the door not responding to the switch inputs, or the door getting stuck in a certain position.

2. What could be causing the OBDII code B19E0 related to the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler?

Potential causes of this code may include a faulty sliding door handle switch, damaged wiring or connectors in the circuit, or a malfunction in the control module responsible for the door operation.

3. How can I troubleshoot the OBDII code B19E0 for the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler?

Begin by inspecting the sliding door handle switch for any visible damage or signs of wear. Check the wiring and connectors for any loose connections or corrosion. It's also recommended to perform a diagnostic scan using an OBDII scanner to pinpoint the exact issue.

4. Is it safe to continue driving my Chrysler with the OBDII code B19E0 related to the Left Sliding Door Handle Switch Circuit Stuck?

It is not recommended to drive the vehicle with this issue, as it may lead to further problems with the sliding door mechanism. It's best to address the problem promptly to ensure the door operates correctly and safely.

5. Can I repair the OBDII code B19E0 for the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler on my own?

Depending on your automotive repair skills, you may be able to address this issue yourself by replacing the faulty sliding door handle switch, repairing damaged wiring, or fixing loose connectors. However, if you're unsure, it's advisable to seek assistance from a professional mechanic.

6. Are there any temporary solutions to consider for the OBDII code B19E0 related to the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler?

While temporary solutions may vary depending on the exact cause of the issue, you can try manually operating the sliding door from the inside or outside handle if possible. However, it's essential to get the problem resolved permanently to avoid further complications.

7. How much can I expect to pay for repairing the OBDII code B19E0 for the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler?

The repair costs can vary depending on the specific cause of the issue and whether you choose to fix it yourself or take it to a professional. Costs may include parts, labor, and diagnostic fees, so it's advisable to obtain quotes from different repair shops.

8. Will resetting the OBDII code B19E0 related to the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler solve the problem?

Resetting the code may temporarily clear the error from the system, but if the underlying issue such as a faulty switch or wiring is not addressed, the code is likely to reappear. It's crucial to diagnose and fix the root cause of the problem.

9. Can extreme weather conditions affect the occurrence of the OBDII code B19E0 for the Left Sliding Door Handle Switch Circuit Stuck in my Chrysler?

Extreme temperatures or moisture can potentially exacerbate issues with the sliding door handle switch circuit, leading to malfunctions or the code being triggered. It's essential to keep the door components well-maintained to prevent weather-related problems.

10. How can I prevent the OBDII code B19E0 related to the Left Sliding Door Handle Switch Circuit Stuck from occurring in my Chrysler in the future?

Regularly inspecting and maintaining the sliding door handle switch, wiring, and connectors can help prevent this code from reoccurring. Keeping the door mechanism clean and lubricated, and addressing any issues promptly can also contribute to avoiding future problems.