B19D3 Code - Right Power Sliding Door Drive Close Direction Excessive Position Count
Quick Answer
This code will set when the Right Power Sliding Door module senses that the Right Power Sliding Door Motor has generated more than 475 pulses during a full power cycle. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19D3 indicates Right Power Sliding Door Drive Close Direction Excessive Position Count.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19D3 Description
What are the Possible Causes of the DTC B19D3?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Sliding Door Position Sensor 1
- Faulty Sliding Door Position Sensor 2
- Faulty Right Power Sliding Door Drive Unit Assembly
- Faulty Right Power Sliding Door Module
How to Fix the DTC B19D3?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19D3 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19D3 code?
Need more information on how to fix the B19D3 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19D3 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B19D3 Chrysler — Right Power Sliding Door Drive Close Direction Excessive Position Count
- B19D3 Dodge — Right Power Sliding Door Drive Close Direction Excessive Position Count
- B19D3 Jeep — Right Power Sliding Door Drive Close Direction Excessive Position Count
- B19D3 RAM — Right Power Sliding Door Drive Close Direction Excessive Position Count
Frequently Asked Questions about B19D3 Code
1. What are the common symptoms of OBDII code B19D3?
- The common symptoms include the power sliding door closing too forcefully or with too much resistance, abnormal noises during door operation, and the door not closing properly.
2. What can cause the OBDII code B19D3 to trigger?
- The code B19D3 is triggered when the power sliding door drive module detects that the door has reached an excessive position count while closing in the designated direction.
3. How can I diagnose the issue related to code B19D3?
- Diagnosis involves checking the power sliding door drive system for any obstructions, damage to the door mechanism, or issues with the sensors and modules that control the door operation.
4. Is it safe to continue using the power sliding door if OBDII code B19D3 is present?
- It is not recommended to continue using the power sliding door if the B19D3 code is present, as it may lead to further damage to the door mechanism or pose a safety risk.
5. What are some repair tips for resolving OBDII code B19D3?
- Repair tips may include inspecting and lubricating the door tracks, adjusting the door alignment, resetting the power sliding door system, or replacing faulty components such as sensors or the drive module.
6. Can I reset the OBDII code B19D3 on my own?
- You can attempt to reset the B19D3 code by disconnecting the car battery for a few minutes or using an OBDII scanner to clear the code. However, it is important to address the underlying issue causing the code to prevent it from reoccurring.
7. How serious is OBDII code B19D3?
- OBDII code B19D3 should be addressed promptly to ensure the proper functioning of the power sliding door and prevent any potential safety hazards or further damage to the door mechanism.
8. Will fixing OBDII code B19D3 be costly?
- The cost of repairing OBDII code B19D3 can vary depending on the underlying cause of the issue. Simple fixes like lubricating the door tracks may be relatively inexpensive, while replacing components or addressing more complex issues may incur higher costs.
9. Can weather conditions affect the occurrence of OBDII code B19D3?
- Extreme weather conditions such as extreme cold or heat can potentially affect the operation of the power sliding door system, leading to issues that may trigger OBDII code B19D3. Regular maintenance and proper care can help mitigate such effects.
10. How can I prevent OBDII code B19D3 from occurring in the future?
- Regularly maintaining and lubricating the power sliding door mechanism, ensuring proper alignment of the door, and addressing any issues with sensors or modules promptly can help prevent the recurrence of OBDII code B19D3.
Discuss the causes and fixes for B19D3 OBDII Code
Code B19D3 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
