B19CE Jeep Code - Right Power Sliding Door Open Direction Overcurrent
Quick Answer
This code will set when the Right Power Sliding Door module senses a current draw of more than 30 amps for over 500ms during a power opening operation. Common causes include Biding Power Sliding Door, Faulty Right Power Sliding Door Drive Unit Assembly, Right Power Sliding Door Drive Unit Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19CE Jeep indicates Right Power Sliding Door Open Direction Overcurrent.
- Common causes
- Common causes include Biding Power Sliding Door, Faulty Right Power Sliding Door Drive Unit Assembly, Right Power Sliding Door Drive Unit Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19CE Jeep Description
What are the Possible Causes of the DTC B19CE Jeep?
- Biding Power Sliding Door
- Faulty Right Power Sliding Door Drive Unit Assembly
- Right Power Sliding Door Drive Unit Assembly harness is open or shorted
- Right Power Sliding Door Drive Unit Assembly circuit poor electrical connection
How to Fix the DTC B19CE Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19CE Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19CE Jeep code?
Need more information on how to fix the B19CE Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19CE Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19CE Jeep Code
1. What are the common symptoms of OBDII code B19CE in a Jeep related to the Right Power Sliding Door Open Direction Overcurrent?
- Common symptoms include difficulty opening or closing the right power sliding door, intermittent operation, and possible electrical malfunctions.
2. What can cause the OBDII code B19CE in a Jeep for the Right Power Sliding Door Open Direction Overcurrent?
- Causes may include a malfunctioning power sliding door motor, damaged wiring harness, faulty door control module, or a short circuit in the electrical system.
3. How can I diagnose the issue triggering OBDII code B19CE on my Jeep's Right Power Sliding Door Open Direction Overcurrent?
- A thorough inspection of the power sliding door components, such as the motor, wiring, and control module, using a diagnostic scanner capable of reading OBDII codes is recommended.
4. What are some repair tips for resolving the OBDII code B19CE related to the Right Power Sliding Door Overcurrent in a Jeep?
- Repair tips may include checking and repairing any damaged wiring, replacing a faulty power sliding door motor, resetting the door control module, or addressing any short circuits in the system.
5. Can I still manually operate the right power sliding door if the OBDII code B19CE is triggered in my Jeep?
- In most cases, you should be able to manually operate the power sliding door if the code is triggered, but it is recommended to address the underlying issue promptly to prevent further complications.
6. Is it safe to continue driving my Jeep with the OBDII code B19CE for the Right Power Sliding Door Overcurrent?
- While it may be safe to drive the vehicle with the code triggered, it is advisable to address the issue as soon as possible to ensure the proper functioning of the power sliding door system.
7. How much does it typically cost to repair the OBDII code B19CE related to the Right Power Sliding Door Overcurrent in a Jeep?
- Repair costs can vary depending on the exact cause of the issue, but it may involve expenses for parts replacement, labor, and diagnostic services from a qualified mechanic or dealership.
8. Can I reset the OBDII code B19CE for the Right Power Sliding Door Overcurrent in my Jeep without professional help?
- Attempting to reset the code without addressing the underlying issue may only temporarily clear the code. It is recommended to diagnose and repair the root cause to ensure the problem is resolved.
9. Are there any preventive maintenance measures I can take to avoid triggering the OBDII code B19CE related to the Right Power Sliding Door Overcurrent in my Jeep?
- Regularly inspecting the power sliding door system, keeping the components clean and well-lubricated, and addressing any signs of malfunction promptly can help prevent issues leading to this OBDII code.
10. How long does it typically take to repair the OBDII code B19CE for the Right Power Sliding Door Overcurrent in a Jeep?
- The repair time can vary depending on the complexity of the issue and the specific components that need attention. It is advisable to consult with a professional technician for a more accurate estimate.
Discuss the causes and fixes for B19CE Jeep OBDII Code
Code B19CE Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
