B19C5 Dodge Code - Left Power Sliding Door Drive Close Direction Excessive Position Count
Quick Answer
This code will set when the Left Power Sliding Door module senses that the Left Power Sliding Door Motor has generated more than 475 pulses during a full power cycle. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C5 Dodge indicates Left Power Sliding Door Drive Close Direction Excessive Position Count.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C5 Dodge Description
What are the Possible Causes of the DTC B19C5 Dodge?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Sliding Door Position Sensor 1
- Faulty Sliding Door Position Sensor 2
- Faulty Left Power Sliding Door Drive Unit Assembly
- Faulty Left Power Sliding Door Module
How to Fix the DTC B19C5 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C5 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C5 Dodge code?
Need more information on how to fix the B19C5 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C5 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C5 Dodge Code
1. What are the common symptoms of OBDII code B19C5 in a Dodge related to the left power sliding door drive close direction excessive position count?
- Common symptoms include the left power sliding door not closing properly, stopping midway, or making unusual noises during operation.
2. What can cause the OBDII code B19C5 to trigger in a Dodge's left power sliding door system?
- This code may be triggered by issues such as a misaligned door, faulty door motor, damaged wiring, or a malfunctioning door control module.
3. How can I diagnose the OBDII code B19C5 in a Dodge with regard to the left power sliding door drive close direction excessive position count?
- Diagnosis involves checking the alignment of the door, inspecting the door motor and wiring for damage, and using a scan tool to retrieve specific error codes.
4. Is it safe to continue using the left power sliding door in a Dodge when OBDII code B19C5 is present?
- It is not recommended to continue using the door when this code is present, as it could lead to further damage and potential safety hazards.
5. What are some DIY repair tips for fixing the OBDII code B19C5 in a Dodge left power sliding door system?
- DIY repair tips may include adjusting the door alignment, checking and repairing any damaged wiring, or replacing the door motor if necessary.
6. Can resetting the OBDII code B19C5 in a Dodge's left power sliding door system resolve the issue temporarily?
- Resetting the code may temporarily clear the error, but unless the underlying issue is addressed, the problem is likely to reoccur.
7. How much does it typically cost to repair the OBDII code B19C5 in a Dodge related to the left power sliding door drive close direction excessive position count?
- Repair costs can vary depending on the exact cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
8. Are there any recalls or technical service bulletins related to OBDII code B19C5 in Dodge vehicles with left power sliding doors?
- It's recommended to check with the manufacturer or a Dodge dealership to see if there are any relevant recalls or technical service bulletins addressing this specific OBDII code.
9. Can the OBDII code B19C5 in a Dodge left power sliding door system be fixed without professional help?
- While some DIY repairs may be possible, complex issues or electrical problems may require professional diagnosis and repair to ensure proper functionality and safety.
10. How can regular maintenance help prevent the occurrence of OBDII code B19C5 in a Dodge's left power sliding door system?
- Regular maintenance, such as checking and adjusting the door alignment, lubricating moving parts, and inspecting wiring, can help prevent issues that may trigger this OBDII code.
Discuss the causes and fixes for B19C5 Dodge OBDII Code
Code B19C5 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
