B19C3 Dodge Code - Left Power Sliding Door Close Direction Overcurrent
Quick Answer
This code will set when the Left Power Sliding Door module senses a current draw of more than 30 amps for over 500 ms during a power closing operation. Common causes include Biding Power Sliding Door, Faulty Left Power Sliding Door Drive Unit Assembly, Left Power Sliding Door Drive Unit Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C3 Dodge indicates Left Power Sliding Door Close Direction Overcurrent.
- Common causes
- Common causes include Biding Power Sliding Door, Faulty Left Power Sliding Door Drive Unit Assembly, Left Power Sliding Door Drive Unit Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C3 Dodge Description
What are the Possible Causes of the DTC B19C3 Dodge?
- Biding Power Sliding Door
- Faulty Left Power Sliding Door Drive Unit Assembly
- Left Power Sliding Door Drive Unit Assembly harness is open or shorted
- Left Power Sliding Door Drive Unit Assembly circuit poor electrical connection
How to Fix the DTC B19C3 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C3 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C3 Dodge code?
Need more information on how to fix the B19C3 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C3 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C3 Dodge Code
1. What are the common symptoms of OBDII code B19C3 in a Dodge related to the Left Power Sliding Door Close Direction Overcurrent issue?
The common symptoms of this code may include difficulty closing the left power sliding door, intermittent operation, or a complete failure of the door to close properly.
2. What can cause the OBDII code B19C3 Left Power Sliding Door Close Direction Overcurrent in a Dodge?
This code is typically triggered by issues such as a malfunctioning power sliding door motor, a faulty door control module, damaged wiring, or a problem with the door track mechanism.
3. How can I diagnose the OBDII code B19C3 in my Dodge with the Left Power Sliding Door Close Direction Overcurrent problem?
Diagnosing this code usually involves performing a thorough inspection of the power sliding door components, checking for loose connections, testing the motor's operation, and using a diagnostic scanner to retrieve specific fault codes.
4. Is it safe to continue driving my Dodge with the B19C3 OBDII code related to the Left Power Sliding Door Overcurrent issue?
It is not recommended to drive the vehicle with this issue unresolved, as it may lead to further damage to the power sliding door system and compromise passenger safety.
5. What are some repair tips for addressing the OBDII code B19C3 in a Dodge with the Left Power Sliding Door Close Direction Overcurrent concern?
Repair tips may include inspecting and repairing damaged wiring, replacing the power sliding door motor or control module if necessary, ensuring proper alignment of the door, and clearing the fault code with a diagnostic tool after completing the repairs.
6. Can a DIY enthusiast fix the OBDII code B19C3 Left Power Sliding Door Overcurrent problem in a Dodge?
While some basic inspections and repairs can be done by DIY enthusiasts, diagnosing and repairing electrical issues related to power sliding doors may require specialized tools and expertise, so it is recommended to consult a professional mechanic.
7. How much does it typically cost to repair the OBDII code B19C3 Left Power Sliding Door Close Direction Overcurrent in a Dodge?
The cost of repairs can vary depending on the specific cause of the issue, parts needed for replacement, and labor rates. It is advisable to obtain quotes from different repair shops for an accurate estimate.
8. Are there any preventive maintenance measures to avoid the OBDII code B19C3 Left Power Sliding Door Overcurrent problem in a Dodge?
Regularly lubricating the door tracks, checking for any signs of wear or damage, and addressing any issues promptly can help prevent the occurrence of the Left Power Sliding Door Close Direction Overcurrent problem.
9. Will resetting the OBDII code B19C3 in a Dodge fix the Left Power Sliding Door Overcurrent issue permanently?
Simply resetting the fault code may temporarily clear the warning light, but it will not fix the underlying problem causing the Left Power Sliding Door Close Direction Overcurrent issue. Proper diagnosis and repairs are necessary for a permanent solution.
10. Can the OBDII code B19C3 Left Power Sliding Door Close Direction Overcurrent problem in a Dodge lead to other related issues?
If left unresolved, the issues causing this code can potentially lead to further damage to the power sliding door system, affecting its operation and safety features. Addressing the problem promptly is crucial to prevent additional complications.
Discuss the causes and fixes for B19C3 Dodge OBDII Code
Code B19C3 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
