B19C2 Jeep Code - Left Power Sliding Door Drive Open Direction Excessive Position Count
Quick Answer
This code will set when the Left Power Sliding Door module senses that the Left Power Sliding Door Motor has generated more than 475 pulses during a full power cycle. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C2 Jeep indicates Left Power Sliding Door Drive Open Direction Excessive Position Count.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C2 Jeep Description
What are the Possible Causes of the DTC B19C2 Jeep?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Sliding Door Position Sensor 1
- Faulty Sliding Door Position Sensor 2
- Faulty Left Power Sliding Door Drive Unit Assembly
- Faulty Left Power Sliding Door Module
How to Fix the DTC B19C2 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C2 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C2 Jeep code?
Need more information on how to fix the B19C2 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C2 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C2 Jeep Code
1. What are common symptoms of OBDII code B19C2 on a Jeep related to the left power sliding door?
The common symptoms include the left power sliding door opening too far or too frequently, potentially causing safety concerns or inconvenience.
2. What could be causing the OBDII code B19C2 on a Jeep for the left power sliding door?
This code is typically triggered by a malfunction in the left power sliding door drive mechanism, such as a faulty position sensor or control module.
3. How can I diagnose the issue causing OBDII code B19C2 on my Jeep's left power sliding door?
To diagnose the problem, you may need to inspect the wiring harness, check the position sensor for proper functioning, and scan the control module for error codes.
4. Is it safe to continue using the left power sliding door with the B19C2 OBDII code present on a Jeep?
It is not recommended to continue using the power sliding door until the underlying issue is identified and repaired, as it may pose safety risks or lead to further damage.
5. Can I reset the OBDII code B19C2 on my Jeep related to the left power sliding door myself?
While you can attempt to clear the code using an OBDII scanner, it is important to address the root cause of the issue to prevent the code from reoccurring.
6. Are there any DIY repair tips for fixing the B19C2 OBDII code on a Jeep's left power sliding door?
DIY repair tips may include checking and cleaning the contacts of the position sensor, ensuring proper alignment of the door, and inspecting for any obstructions in the door's path.
7. How much does it typically cost to repair the B19C2 OBDII code on a Jeep's left power sliding door?
The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the position sensor, repairing wiring harnesses, or recalibrating the control module.
8. Can extreme weather conditions or physical damage trigger the B19C2 OBDII code on a Jeep's left power sliding door?
Yes, extreme weather conditions or physical damage to the door mechanism can potentially cause malfunctions leading to the B19C2 trouble code.
9. Will ignoring the B19C2 OBDII code affect other electrical components or systems in the Jeep?
Ignoring the B19C2 code may lead to further malfunctions in the power sliding door system and could potentially affect other related electrical components if left unresolved.
10. How soon should I address the B19C2 OBDII code on my Jeep's left power sliding door to prevent any further issues?
It is advisable to address the B19C2 code promptly to avoid safety hazards and prevent additional damage to the power sliding door system.
Discuss the causes and fixes for B19C2 Jeep OBDII Code
Code B19C2 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
