B19C2 Dodge Code - Left Power Sliding Door Drive Open Direction Excessive Position Count
Quick Answer
This code will set when the Left Power Sliding Door module senses that the Left Power Sliding Door Motor has generated more than 475 pulses during a full power cycle. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C2 Dodge indicates Left Power Sliding Door Drive Open Direction Excessive Position Count.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C2 Dodge Description
What are the Possible Causes of the DTC B19C2 Dodge?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Sliding Door Position Sensor 1
- Faulty Sliding Door Position Sensor 2
- Faulty Left Power Sliding Door Drive Unit Assembly
- Faulty Left Power Sliding Door Module
How to Fix the DTC B19C2 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C2 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C2 Dodge code?
Need more information on how to fix the B19C2 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C2 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C2 Dodge Code
1. What are the common symptoms of OBDII code B19C2 in a Dodge related to the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- The common symptoms include the power sliding door not closing properly, unusual noises during operation, and intermittent opening/closing issues.
2. What could be causing the OBDII code B19C2 in a Dodge with regards to the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- The code may be triggered by a faulty power sliding door drive motor, damaged wiring harness, or a misaligned door track.
3. How can I diagnose the OBDII code B19C2 related to the Left Power Sliding Door Drive Open Direction Excessive Position Count in my Dodge?
- Diagnosis involves checking the power sliding door motor operation, inspecting the wiring for any damage, and ensuring the door track is properly aligned.
4. What are some repair tips for resolving the OBDII code B19C2 in a Dodge due to the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- Repair tips include repairing or replacing the power sliding door drive motor, repairing any damaged wiring, and adjusting the door track alignment.
5. Can I continue driving my Dodge with the OBDII code B19C2 related to the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- It is not recommended to continue driving with this issue as it can lead to further damage to the power sliding door system and compromise safety.
6. How much does it typically cost to repair the OBDII code B19C2 in a Dodge caused by the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
7. Can I reset the OBDII code B19C2 in my Dodge myself after repairing the Left Power Sliding Door Drive Open Direction Excessive Position Count issue?
- Yes, you can reset the code using an OBDII scanner or by disconnecting the car battery for a few minutes to clear the error code.
8. Is the OBDII code B19C2 related to the Left Power Sliding Door Drive Open Direction Excessive Position Count a common issue in Dodge vehicles?
- While it may not be extremely common, some Dodge owners have reported encountering this issue with their power sliding doors.
9. Are there any preventive measures to avoid encountering the OBDII code B19C2 in a Dodge due to the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- Regularly inspecting and maintaining the power sliding door system, ensuring proper alignment, and addressing any issues promptly can help prevent this code from occurring.
10. How long does it typically take to repair the OBDII code B19C2 in a Dodge caused by the Left Power Sliding Door Drive Open Direction Excessive Position Count?
- The repair time can vary depending on the exact cause and complexity of the issue, but it may take a few hours to a full day to complete the necessary repairs.
Discuss the causes and fixes for B19C2 Dodge OBDII Code
Code B19C2 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
