B19C2 Chrysler Code - Left Power Sliding Door Drive Open Direction Excessive Position Count
Quick Answer
This code will set when the Left Power Sliding Door module senses that the Left Power Sliding Door Motor has generated more than 475 pulses during a full power cycle. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C2 Chrysler indicates Left Power Sliding Door Drive Open Direction Excessive Position Count.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Sliding Door Position Sensor 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C2 Chrysler Description
What are the Possible Causes of the DTC B19C2 Chrysler?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Sliding Door Position Sensor 1
- Faulty Sliding Door Position Sensor 2
- Faulty Left Power Sliding Door Drive Unit Assembly
- Faulty Left Power Sliding Door Module
How to Fix the DTC B19C2 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C2 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C2 Chrysler code?
Need more information on how to fix the B19C2 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C2 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C2 Chrysler Code
1. What does OBDII code B19C2 for Chrysler indicate?
The code B19C2 refers to the Left Power Sliding Door Drive Open Direction Excessive Position Count error.
2. What are the common symptoms of OBDII code B19C2 in a Chrysler vehicle?
Symptoms may include the left power sliding door not closing properly, intermittent door operation, or issues with the door's position.
3. What are the possible causes of the B19C2 trouble code in a Chrysler's left power sliding door system?
Common causes include faulty door position sensors, damaged wiring, misaligned door components, or issues with the door drive motor.
4. How can I diagnose the B19C2 error code in my Chrysler's left power sliding door system?
Diagnosis typically involves using a scan tool to read the code, inspecting the door components for damage, and testing the door operation to identify the root cause.
5. Can I repair the B19C2 error in my Chrysler at home?
Depending on the cause, repairs may range from simple sensor adjustments to complex motor replacements. Basic troubleshooting can be done at home, but more extensive repairs may require professional assistance.
6. Is it safe to drive my Chrysler with the B19C2 code present?
It is not recommended to drive with this code active, as it can lead to potential safety hazards if the power sliding door malfunctions while the vehicle is in motion.
7. Are there any temporary fixes for the B19C2 error in a Chrysler's left power sliding door system?
If the issue is minor, resetting the door system by disconnecting the battery for a few minutes may temporarily clear the code. However, this is not a permanent solution.
8. How much does it typically cost to repair the B19C2 code in a Chrysler vehicle?
The cost of repairs can vary depending on the specific cause of the issue. Simple fixes like sensor adjustments may be inexpensive, while motor replacements or wiring repairs can be more costly.
9. Can the B19C2 code reoccur after repairs are done on a Chrysler's left power sliding door system?
If the root cause of the issue is not properly addressed during repairs, the code may reoccur. It's essential to diagnose the problem accurately to prevent future occurrences.
10. How can I prevent the B19C2 error from happening again in my Chrysler's left power sliding door system?
Regular maintenance, timely repairs of any door-related issues, and following the manufacturer's recommended service schedule can help prevent the recurrence of the B19C2 trouble code.
Discuss the causes and fixes for B19C2 Chrysler OBDII Code
Code B19C2 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
