B19C1 RAM Code - Left Power Sliding Door Drive Open Direction Excessive Time
Quick Answer
This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Motor has taken longer than 20 seconds to complete a power opening operation. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C1 RAM indicates Left Power Sliding Door Drive Open Direction Excessive Time.
- Common causes
- Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C1 RAM Description
What are the Possible Causes of the DTC B19C1 RAM?
- Biding Power Sliding Door
- Power Sliding Door Module Out Of Calibration
- Faulty Left Power Sliding Door Motor Assembly
- Left Power Sliding Door Motor Assembly harness is open or shorted
- Left Power Sliding Door Motor Assembly circuit poor electrical connection
- Faulty Power Sliding Door Module
How to Fix the DTC B19C1 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C1 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C1 RAM code?
Need more information on how to fix the B19C1 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C1 RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C1 RAM Code
1. What are the common symptoms of OBDII code B19C1 related to the left power sliding door drive open direction excessive time?
- The common symptoms include difficulty opening or closing the left power sliding door, the door getting stuck in one position, and potential warning lights on the dashboard.
2. What could cause the OBDII code B19C1 to trigger for the left power sliding door drive open direction excessive time?
- The code may be triggered due to issues with the power sliding door drive motor, faulty sensors, wiring problems, or mechanical obstructions preventing proper door operation.
3. How can I diagnose the cause of OBDII code B19C1 for the left power sliding door drive open direction excessive time?
- Diagnosing this code may involve checking the power sliding door motor, inspecting the sensors and wiring connections, and ensuring there are no physical obstructions hindering door movement.
4. Are there any quick repair tips for fixing OBDII code B19C1 in relation to the left power sliding door issue?
- Quick repair tips may include checking and resetting the power sliding door system, lubricating moving parts, clearing any debris obstructing door movement, and ensuring proper electrical connections.
5. Can I continue driving my vehicle with OBDII code B19C1 related to the left power sliding door problem?
- It is not recommended to continue driving the vehicle with this code active, as it may lead to further damage to the power sliding door system and compromise passenger safety.
6. How much does it typically cost to repair OBDII code B19C1 for the left power sliding door drive open direction excessive time?
- The cost of repair can vary depending on the underlying cause of the issue, but it may involve replacing components, fixing wiring problems, or reprogramming the power sliding door system, which could range from a few hundred to over a thousand dollars.
7. Can OBDII code B19C1 be cleared/reset manually for the left power sliding door issue?
- The code can be cleared/reset using an OBDII scanner or diagnostic tool, but it is important to address the root cause of the problem to prevent the code from reoccurring.
8. Is it possible to prevent OBDII code B19C1 from appearing again in the future for the left power sliding door drive open direction excessive time?
- Regular maintenance of the power sliding door system, prompt addressing of any door operation issues, and periodic inspection of sensors and wiring connections can help prevent the recurrence of this code.
9. How long does it typically take to repair OBDII code B19C1 related to the left power sliding door drive open direction excessive time?
- The repair time can vary based on the specific cause of the issue and the extent of repairs needed, but it may take a few hours to a full day to diagnose and fix the problem effectively.
10. Are there any safety precautions I should take if OBDII code B19C1 is triggered for the left power sliding door drive open direction excessive time?
- It is advisable to avoid using the power sliding door until the issue is resolved to prevent any potential safety hazards or malfunctions while operating the vehicle.
Discuss the causes and fixes for B19C1 RAM OBDII Code
Code B19C1 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
