AutoCodes – Jeep – B19C1 Jeep

B19C1 Jeep Code - Left Power Sliding Door Drive Open Direction Excessive Time

Quick Answer

This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Motor has taken longer than 20 seconds to complete a power opening operation. Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19C1 Jeep indicates Left Power Sliding Door Drive Open Direction Excessive Time.
Common causes: Common causes include Biding Power Sliding Door, Power Sliding Door Module Out Of Calibration, Faulty Left Power Sliding Door Motor Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 624

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19C1 Jeep Description

This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Motor has taken longer than 20 seconds to complete a power opening operation. It will also set if an ignition crank message is sent, lasting longer than 15 seconds, during an opening operation.

OBDII Code B19C1 Jeep - Left Power Sliding Door Drive Open Direction Excessive Time - AutoCodes.com — B19C1 Jeep Code - Left Power Sliding Door Drive Open Direction Excessive Time

What does this mean?

What are the Possible Causes of the DTC B19C1 Jeep?

Biding Power Sliding Door
Power Sliding Door Module Out Of Calibration
Faulty Left Power Sliding Door Motor Assembly
Left Power Sliding Door Motor Assembly harness is open or shorted
Left Power Sliding Door Motor Assembly circuit poor electrical connection
Faulty Power Sliding Door Module

How to Fix the DTC B19C1 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19C1 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19C1 Jeep code?

Need more information on how to fix the B19C1 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19C1 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19C1 Jeep Code

1. What are the common symptoms of OBDII code B19C1 in a Jeep related to the Left Power Sliding Door Drive Open Direction Excessive Time?

- The most common symptom is the left power sliding door taking too long to open, close, or respond to commands.

2. What could be causing the OBDII code B19C1 to trigger in a Jeep's left power sliding door?

- This code is typically triggered by issues with the power sliding door drive unit, such as motor malfunctions or sensor failures.

3. How can I diagnose the cause of OBDII code B19C1 in my Jeep's left power sliding door?

- To diagnose this issue, you may need to inspect the power sliding door mechanism, check for any obstructions, and test the motor and sensors for proper function.

4. Can I continue to use the power sliding door if OBDII code B19C1 is present in my Jeep?

- It is not recommended to continue using the power sliding door with this code present, as it may lead to further damage or safety hazards.

5. What are some repair tips for resolving OBDII code B19C1 in a Jeep's left power sliding door?

- Repair tips may include cleaning and lubricating the door mechanism, replacing faulty sensors or motors, and resetting the power sliding door system.

6. Is it possible to reset OBDII code B19C1 in a Jeep without professional help?

- In some cases, you may be able to reset the code by disconnecting the vehicle's battery for a few minutes and then reconnecting it to clear the error code.

7. Can weather conditions affect the triggering of OBDII code B19C1 in a Jeep's left power sliding door?

- Extreme weather conditions, such as cold temperatures causing door mechanisms to freeze, can potentially contribute to issues triggering this code.

8. How serious is OBDII code B19C1 in a Jeep and should it be addressed immediately?

- While the severity may vary, it is advisable to address this code promptly to ensure the proper functioning of the power sliding door and prevent further complications.

9. Are there any preventive maintenance measures I can take to avoid OBDII code B19C1 in my Jeep's left power sliding door?

- Regularly cleaning and lubricating the power sliding door mechanism, as well as addressing any issues promptly, can help prevent the occurrence of this code.

10. What is the typical cost of repairing OBDII code B19C1 in a Jeep's left power sliding door?

- The cost of repair can vary depending on the specific issue causing the code, but it may involve replacing parts, which could range from a few hundred to over a thousand dollars.