B19C0 RAM Code - Left Power Sliding Door Open Direction Overcurrent
Quick Answer
This code will set when the Left Power Sliding Door module senses a current draw of more than 30 amps for 500 ms during a power opening operation. Common causes include Biding Power Sliding Door, Faulty Left Power Sliding Door Drive Unit Assembly, Left Power Sliding Door Drive Unit Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19C0 RAM indicates Left Power Sliding Door Open Direction Overcurrent.
- Common causes
- Common causes include Biding Power Sliding Door, Faulty Left Power Sliding Door Drive Unit Assembly, Left Power Sliding Door Drive Unit Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19C0 RAM Description
What are the Possible Causes of the DTC B19C0 RAM?
- Biding Power Sliding Door
- Faulty Left Power Sliding Door Drive Unit Assembly
- Left Power Sliding Door Drive Unit Assembly harness is open or shorted
- Left Power Sliding Door Drive Unit Assembly circuit poor electrical connection
How to Fix the DTC B19C0 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19C0 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19C0 RAM code?
Need more information on how to fix the B19C0 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19C0 RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19C0 RAM Code
1. What does the OBDII code B19C0 mean for a RAM vehicle?
The code B19C0 indicates an overcurrent condition detected in the left power sliding door's open direction circuit, which may prevent the door from opening properly.
2. What are the common symptoms of the B19C0 code?
Symptoms include the left power sliding door failing to open, intermittent operation, or the door stopping mid-motion.
3. What causes the B19C0 code to appear?
The code is typically caused by issues such as a short circuit, damaged wiring, a faulty motor, or an obstruction in the door's path.
4. Can the B19C0 code indicate a problem with the sliding door motor?
Yes, a faulty or overloaded sliding door motor can trigger the B19C0 code due to excessive current draw.
5. How do I diagnose the B19C0 code on my RAM vehicle?
Start by inspecting the sliding door wiring and connectors for damage, check for obstructions in the door track, and test the motor for proper function.
6. Is it safe to drive with the B19C0 code active?
Yes, it is generally safe to drive, but the left power sliding door may not function correctly, which could be inconvenient or pose a safety concern for passengers.
7. What tools are needed to troubleshoot the B19C0 code?
You may need a multimeter to test wiring, a diagnostic scanner to read and clear the code, and basic tools to access the door's components.
8. How can I fix the B19C0 code on my RAM vehicle?
Repairs may include replacing damaged wiring, clearing obstructions, repairing or replacing the sliding door motor, or reprogramming the door control module if needed.
9. Can a blown fuse cause the B19C0 code?
A blown fuse is unlikely to cause this specific code but could indicate an underlying issue with the circuit that needs to be addressed.
10. Do I need to reprogram the door control module after fixing the B19C0 code?
Reprogramming is not always necessary, but if the issue persists after repairs, reprogramming the module may help reset its parameters.
Discuss the causes and fixes for B19C0 RAM OBDII Code
Code B19C0 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
