B19BC RAM Code - Right Power Sliding Door Drive Clutch Control Circuit Low
Quick Answer
The Power Sliding Door Module monitors the Right Power Sliding Door Drive Clutch Control Circuit. Common causes include Faulty Power Sliding Door Track, Power Sliding Door Track harness is open or shorted, Power Sliding Door Track circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19BC RAM indicates Right Power Sliding Door Drive Clutch Control Circuit Low.
- Common causes
- Common causes include Faulty Power Sliding Door Track, Power Sliding Door Track harness is open or shorted, Power Sliding Door Track circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19BC RAM Description
What are the Possible Causes of the DTC B19BC RAM?
- Faulty Power Sliding Door Track
- Power Sliding Door Track harness is open or shorted
- Power Sliding Door Track circuit poor electrical connection
- Faulty Right Power Sliding Door Unit Assembly
- Faulty Power Sliding Door Module
How to Fix the DTC B19BC RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19BC RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19BC RAM code?
Need more information on how to fix the B19BC RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19BC RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19BC RAM Code
What does the OBDII code B19BC indicate?
The code B19BC indicates a problem with the right power sliding door drive clutch control circuit, specifically that it is operating at a low voltage or current level.
What symptoms might I experience with the B19BC code?
Common symptoms include the right sliding door not opening or closing properly, unusual noises from the door mechanism, or the door failing to respond to the control switch.
What are some potential causes of the B19BC code?
Potential causes include a faulty power sliding door motor, damaged wiring or connectors in the control circuit, or a malfunctioning door control module.
Can I drive my vehicle with the B19BC code?
While the vehicle may still be drivable, it's advisable to address the issue promptly to avoid potential safety hazards or further damage to the sliding door system.
How can I diagnose the B19BC code?
Start by using an OBDII scanner to confirm the code, then visually inspect the wiring and connectors for damage. Testing the power sliding door motor and control module can also help identify the issue.
What are some common repair solutions for the B19BC code?
Repairs may involve replacing a faulty power sliding door motor, repairing or replacing damaged wiring, or replacing the door control module if necessary.
Is there a way to temporarily fix the sliding door if I encounter the B19BC code?
If the door is stuck, you can manually operate it, but be cautious not to force it. Disconnecting the battery for a few minutes may reset the system, but this is only a temporary measure.
How much might it cost to repair the issue associated with the B19BC code?
Repair costs can vary widely depending on the specific issue, ranging from $100 for minor wiring repairs to $500 or more for replacing the motor or control module.
Is the B19BC code specific to certain RAM models?
Yes, the B19BC code is typically associated with certain RAM vehicles equipped with power sliding doors, but it’s best to consult the vehicle’s service manual for specific application details.
Will clearing the B19BC code fix the problem?
Clearing the code may temporarily turn off the warning light, but if the underlying issue is not resolved, the code will likely return, indicating that further diagnosis and repair are needed.
Discuss the causes and fixes for B19BC RAM OBDII Code
Code B19BC RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
