AutoCodes – Chrysler – B19B7 Chrysler

B19B7 Chrysler Code - Left Power Sliding Door Drive Clutch Control Circuit Low

Quick Answer

The Power Sliding Door Module monitors the Left Power Sliding Door Drive Clutch Control Circuit. Common causes include Faulty Right Power Sliding Door module, Faulty Power Sliding Door Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19B7 Chrysler indicates Left Power Sliding Door Drive Clutch Control Circuit Low.
Common causes: Common causes include Faulty Right Power Sliding Door module, Faulty Power Sliding Door Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 540

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19B7 Chrysler Description

The Power Sliding Door Module monitors the Left Power Sliding Door Drive Clutch Control Circuit. This code will set when the Left Power Sliding Door module senses the Left Power Sliding Door Clutch Driver Circuit is less than 1.0 volt while the clutch is engaged. The drive clutch voltage can be read through the scan tool.

OBDII Code B19B7 Chrysler - Left Power Sliding Door Drive Clutch Control Circuit Low - AutoCodes.com — B19B7 Chrysler Code - Left Power Sliding Door Drive Clutch Control Circuit Low

What does this mean?

What are the Possible Causes of the DTC B19B7 Chrysler?

Faulty Right Power Sliding Door module
Faulty Power Sliding Door Module

How to Fix the DTC B19B7 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19B7 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19B7 Chrysler code?

Need more information on how to fix the B19B7 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19B7 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19B7 Chrysler Code

1. What are the common symptoms of OBDII code B19B7 for the Left Power Sliding Door Drive Clutch Control Circuit Low in a Chrysler?

The common symptoms include the left power sliding door not opening or closing properly, intermittent operation, or complete failure to operate.

2. What can cause the OBDII code B19B7 to appear in a Chrysler Left Power Sliding Door system?

The code B19B7 usually indicates a fault in the drive clutch control circuit, which can be caused by a damaged wiring harness, a faulty drive clutch motor, or a malfunctioning control module.

3. How can I diagnose the issue related to code B19B7 in my Chrysler's Left Power Sliding Door system?

You can start the diagnosis by checking the wiring harness for any visible damage, testing the drive clutch motor for proper functionality, and using a scan tool to check the control module for error codes and data.

4. Are there any DIY repair tips for resolving the OBDII code B19B7 in a Chrysler Left Power Sliding Door system?

DIY repair tips include checking and repairing any damaged wiring, replacing the drive clutch motor if necessary, and resetting the control module after making repairs.

5. Can I continue driving my Chrysler with the OBDII code B19B7 related to the Left Power Sliding Door issue?

It is not recommended to drive the vehicle with the left power sliding door malfunctioning, as it can pose safety hazards and may lead to further damage if not addressed promptly.

6. How much does it typically cost to repair the OBDII code B19B7 in a Chrysler Left Power Sliding Door system?

The repair cost can vary depending on the exact cause of the issue, but it may range from $200 to $600 for parts and labor at a dealership or repair shop.

7. Will resetting the OBDII code B19B7 in my Chrysler make the Left Power Sliding Door work again?

Resetting the code may temporarily clear the error message, but it will not fix the underlying issue causing the malfunction in the Left Power Sliding Door system.

8. Can extreme weather conditions affect the occurrence of the OBDII code B19B7 in a Chrysler Left Power Sliding Door system?

Yes, extreme temperatures or moisture can sometimes affect the operation of the drive clutch control circuit, leading to the triggering of the B19B7 fault code.

9. Is it possible to prevent the OBDII code B19B7 from reoccurring in my Chrysler Left Power Sliding Door system?

Regular maintenance, such as keeping the wiring harness in good condition and promptly addressing any door operation issues, can help prevent the recurrence of the B19B7 fault code.

10. How long does it take to repair the OBDII code B19B7 related to the Left Power Sliding Door in a Chrysler?

The repair time can vary based on the specific diagnosis and parts availability, but it may take anywhere from 1 to 4 hours to address the issue effectively.