AutoCodes – Generic – B19A6

B19A6 Code - Open In Front Active Headrest Squib LH Circuit

Quick Answer

The Front Active Headrest Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and the Active Headrest Inflator LH. Common causes include Faulty Active Headrest Inflator Assembly Left (LH) (Front Active Headrest Squib LH), Active Headrest Inflator Assembly Left (LH) harness is open or shorted, Active Headrest Inflator Assembly Left (LH) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19A6 indicates Open In Front Active Headrest Squib LH Circuit.
Common causes: Common causes include Faulty Active Headrest Inflator Assembly Left (LH) (Front Active Headrest Squib LH), Active Headrest Inflator Assembly Left (LH) harness is open or shorted, Active Headrest Inflator Assembly Left (LH) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,359

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 02, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19A6 Description

The Front Active Headrest Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and the Active Headrest Inflator LH. This circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Front Active Headrest Squib LH Circuit.

OBDII Code B19A6 - Open In Front Active Headrest Squib LH Circuit - AutoCodes.com — B19A6 Code - Open In Front Active Headrest Squib LH Circuit

What does this mean?

What are the Possible Causes of the DTC B19A6?

Faulty Active Headrest Inflator Assembly Left (LH) (Front Active Headrest Squib LH)
Active Headrest Inflator Assembly Left (LH) harness is open or shorted
Active Headrest Inflator Assembly Left (LH) circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B19A6?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19A6 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19A6 code?

Need more information on how to fix the B19A6 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19A6 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B19A6 Chrysler — Left Power Sliding Door Control Circuit 1 Open
B19A6 Dodge — Left Power Sliding Door Control Circuit 1 Open
B19A6 Ford — Passenger Seat Back Blower Speed Short To Ground
B19A6 Jeep — Left Power Sliding Door Control Circuit 1 Open
B19A6 Lexus — Open In Front Active Headrest Squib LH Circuit
B19A6 Lincoln — Passenger Seat Back Blower Speed Short To Ground
B19A6 Mercury — Passenger Seat Back Blower Speed Short To Ground
B19A6 RAM — Left Power Sliding Door Control Circuit 1 Open
B19A6 Scion — Open In Front Active Headrest Squib LH Circuit
B19A6 Toyota — Open In Front Active Headrest Squib LH Circuit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19A6 Code

1. What are the common symptoms of OBDII code B19A6, Open In Front Active Headrest Squib LH Circuit?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential malfunction of the front active headrest system.

2. What can cause the OBDII code B19A6 to trigger?

- The code B19A6 is triggered when there is an open circuit in the front active headrest squib LH circuit, which may be caused by damaged wiring, a faulty squib or connector, or issues with the airbag control module.

3. How serious is the OBDII code B19A6, Open In Front Active Headrest Squib LH Circuit?

- This code indicates a potential safety issue with the front active headrest system and should be addressed promptly to ensure proper functioning of the airbag system in case of a collision.

4. What should I do if I encounter the OBDII code B19A6?

- If you encounter this code, it is recommended to have the vehicle inspected by a qualified mechanic to diagnose the exact cause of the issue and determine the necessary repairs.

5. Can I continue driving with the OBDII code B19A6 present?

- It is not recommended to continue driving with this code present, as it may indicate a problem with the airbag system, which could potentially affect its functionality in the event of an accident.

6. How is the OBDII code B19A6 typically diagnosed?

- Diagnosis of this code usually involves using a scan tool to retrieve the specific fault code, followed by a visual inspection of the wiring, connectors, and components in the front active headrest squib LH circuit.

7. What are some repair tips for fixing the OBDII code B19A6?

- Repair tips may include checking and repairing any damaged wiring or connectors, replacing the faulty squib or component causing the open circuit, and clearing the fault code with a diagnostic tool.

8. Is it safe to attempt DIY repairs for the OBDII code B19A6?

- Due to the safety implications of issues with the airbag system, it is generally recommended to have a professional technician perform the necessary repairs to ensure proper functionality and safety.

9. Can resetting the OBDII code B19A6 clear the issue permanently?

- Resetting the code may temporarily clear the issue, but if the root cause of the open circuit in the front active headrest squib LH circuit is not addressed, the code is likely to reappear.

10. How can I prevent the OBDII code B19A6 from recurring in the future?

- To prevent the code from recurring, it is important to address the root cause of the open circuit, ensure proper installation and maintenance of the front active headrest system, and have the airbag system regularly inspected for any potential issues.