B1992 Ford Code - Driver Side Side Mount Airbag Circuit Short To Battery Voltage
Quick Answer
The Restraints Control Module (RCM) monitors the Driver Side Side Mount Airbag. Common causes include Faulty Driver Side Side Mount Airbag, Driver Side Side Mount Airbag harness is open or shorted, Driver Side Side Mount Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1992 Ford indicates Driver Side Side Mount Airbag Circuit Short To Battery Voltage.
- Common causes
- Common causes include Faulty Driver Side Side Mount Airbag, Driver Side Side Mount Airbag harness is open or shorted, Driver Side Side Mount Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1992 Ford Description
What are the Possible Causes of the DTC B1992 Ford?
- Faulty Driver Side Side Mount Airbag
- Driver Side Side Mount Airbag harness is open or shorted
- Driver Side Side Mount Airbag circuit poor electrical connection
- Faulty Restraints Control Module (RCM)
How to Fix the DTC B1992 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1992 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1992 Ford code?
Need more information on how to fix the B1992 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1992 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1992 Ford Code
1. What are the common symptoms of OBDII code B1992 in a Ford vehicle?
- Common symptoms include an illuminated airbag warning light on the dashboard, non-functioning airbag system, and potential loss of driver side airbag protection.
2. What causes the OBDII code B1992 indicating a driver side side mount airbag circuit short to battery voltage in a Ford?
- The most common cause of this code is a short circuit in the driver side side mount airbag circuit, often due to damaged wiring or a faulty airbag module.
3. How can I diagnose the driver side side mount airbag circuit short to battery voltage issue in my Ford?
- To diagnose this issue, you will need a professional OBDII scanner to read the specific code, perform a visual inspection of the airbag system wiring, and test the components for continuity and resistance.
4. Is it safe to drive my Ford with the B1992 code related to the driver side side mount airbag circuit short to battery voltage?
- It is not recommended to drive the vehicle with this code present, as the airbag system may be compromised, leading to a potential safety risk in the event of a collision.
5. How can I repair the driver side side mount airbag circuit short to battery voltage issue in my Ford?
- Repairing this issue typically involves repairing or replacing the damaged wiring in the driver side side mount airbag circuit and addressing any underlying issues with the airbag module.
6. Can I reset the OBDII code B1992 in my Ford after repairing the driver side side mount airbag circuit short to battery voltage issue?
- Once the repair is completed, the code can be cleared using an OBDII scanner to reset the airbag system and turn off the warning light on the dashboard.
7. Are there any precautions I should take when working on the driver side side mount airbag circuit in my Ford?
- It is highly recommended to disconnect the vehicle's battery and wait for the airbag system to fully discharge before working on any components related to the airbag circuit to prevent accidental deployment.
8. Will disconnecting the battery reset the OBDII code B1992 indicating a driver side side mount airbag circuit short to battery voltage in my Ford?
- Disconnecting the battery may temporarily clear the code, but it is essential to diagnose and repair the underlying issue to prevent the code from reappearing.
9. Can a DIY enthusiast repair the driver side side mount airbag circuit short to battery voltage issue in a Ford, or is professional help required?
- While some DIY enthusiasts may have the skills to diagnose and repair this issue, it is recommended to seek professional help to ensure the airbag system is properly repaired and functioning correctly.
10. How much does it typically cost to repair the OBDII code B1992 related to the driver side side mount airbag circuit short to battery voltage in a Ford?
- The cost of repairing this issue can vary depending on the extent of the damage and the parts needed, but it is advisable to budget for potential wiring repairs or airbag module replacement, which can range from a few hundred to over a thousand dollars.
Discuss the causes and fixes for B1992 Ford OBDII Code
Code B1992 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
