B196C RAM Code - Power Liftgate Close Direction Excessive Position Sensor Counts
Quick Answer
The Power Liftgate Module monitors the Power Liftgate Close Direction. Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Faulty Liftgate Latch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B196C RAM indicates Power Liftgate Close Direction Excessive Position Sensor Counts.
- Common causes
- Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Faulty Liftgate Latch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B196C RAM Description
What are the Possible Causes of the DTC B196C RAM?
- Binding Liftgate
- Faulty Liftgate Drive Unit
- Faulty Liftgate Latch
- Faulty Power Liftgate Module
How to Fix the DTC B196C RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B196C RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B196C RAM code?
Need more information on how to fix the B196C RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B196C RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B196C RAM Code
1. What are the common symptoms of OBDII code B196C related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- The common symptoms include the power liftgate closing too forcefully or repeatedly attempting to close even when obstruction is present.
2. What could be causing the OBDII code B196C related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Possible causes may include faulty position sensors, misalignment of the liftgate, damaged wiring, or issues with the liftgate control module.
3. How can I diagnose the issue associated with the OBDII code B196C for the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Diagnosis involves checking the position sensors for proper functioning, inspecting the liftgate alignment, and testing the wiring and connections for any faults.
4. Is it safe to continue using the power liftgate if OBDII code B196C is present?
- It is recommended to avoid using the power liftgate until the issue is diagnosed and repaired to prevent any potential safety hazards or further damage.
5. Can I reset the OBDII code B196C related to the Power Liftgate Close Direction Excessive Position Sensor Counts myself?
- While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.
6. What are some repair tips for resolving OBDII code B196C associated with the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Repair tips may include recalibrating the liftgate position sensors, realigning the liftgate, repairing any damaged wiring, or replacing faulty components as needed.
7. How critical is it to address OBDII code B196C for the Power Liftgate Close Direction Excessive Position Sensor Counts promptly?
- It is important to address the code promptly to ensure the proper functioning of the power liftgate and prevent any potential safety risks or further damage to the system.
8. Can extreme weather conditions contribute to triggering OBDII code B196C related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Yes, extreme weather conditions like temperature fluctuations or moisture can sometimes affect the sensors or electrical connections, leading to the code being triggered.
9. Are there any recalls or service bulletins related to OBDII code B196C and the Power Liftgate Close Direction Excessive Position Sensor Counts?
- It is advisable to check with the vehicle manufacturer or authorized service centers for any recalls or service bulletins related to this specific OBDII code.
10. Will driving with OBDII code B196C for the Power Liftgate Close Direction Excessive Position Sensor Counts affect the overall performance of the vehicle?
- While the drivability of the vehicle may not be directly impacted by this code, it is best to address it promptly to avoid potential issues with the power liftgate system and ensure overall safety and functionality.
Discuss the causes and fixes for B196C RAM OBDII Code
Code B196C RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
