B196C Dodge Code - Power Liftgate Close Direction Excessive Position Sensor Counts
Quick Answer
The Power Liftgate Module monitors the Power Liftgate Close Direction. Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Faulty Liftgate Latch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B196C Dodge indicates Power Liftgate Close Direction Excessive Position Sensor Counts.
- Common causes
- Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Faulty Liftgate Latch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B196C Dodge Description
What are the Possible Causes of the DTC B196C Dodge?
- Binding Liftgate
- Faulty Liftgate Drive Unit
- Faulty Liftgate Latch
- Faulty Power Liftgate Module
How to Fix the DTC B196C Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B196C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B196C Dodge code?
Need more information on how to fix the B196C Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B196C Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B196C Dodge Code
1. What are the common symptoms of OBDII code B196C in a Dodge related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Common symptoms include the power liftgate closing abruptly or stopping unexpectedly during operation.
2. What is the primary cause of OBDII code B196C in a Dodge associated with the Power Liftgate Close Direction Excessive Position Sensor Counts?
- The primary cause is typically a faulty or misaligned position sensor in the power liftgate system.
3. How can I diagnose the issue causing OBDII code B196C in my Dodge related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- A diagnostic scan tool can help pinpoint the exact location of the faulty sensor or any other related issues in the power liftgate system.
4. Can I continue to use my Dodge with OBDII code B196C related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- It is not recommended to continue using the power liftgate until the issue is diagnosed and repaired to prevent any further damage or safety hazards.
5. What are some possible repair tips for fixing OBDII code B196C in a Dodge due to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Inspect the position sensor for any damage or misalignment, recalibrate the sensor if needed, and clear the error code to see if the issue persists.
6. Are there any DIY solutions for resolving OBDII code B196C in a Dodge associated with the Power Liftgate Close Direction Excessive Position Sensor Counts?
- While some basic inspections and sensor realignment can be done DIY, it is recommended to have a professional technician diagnose and repair the issue for accurate and safe resolution.
7. How much does it typically cost to repair OBDII code B196C in a Dodge related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Repair costs can vary depending on the exact cause of the issue, but it is advisable to budget for sensor replacement or recalibration by a qualified technician.
8. Will resetting the OBDII code B196C in my Dodge fix the issue with the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Resetting the code may temporarily clear the error, but the underlying issue with the position sensor or power liftgate system needs to be addressed for a permanent solution.
9. Can extreme weather conditions affect the occurrence of OBDII code B196C in a Dodge related to the Power Liftgate Close Direction Excessive Position Sensor Counts?
- Extreme temperatures or humidity levels can sometimes impact sensor functionality, leading to false readings and triggering the error code.
10. Is it safe to drive my Dodge with OBDII code B196C related to the Power Liftgate Close Direction Excessive Position Sensor Counts if the power liftgate is manually operated?
- While manually operating the power liftgate may be safe, it is still recommended to have the underlying issue diagnosed and repaired to ensure the overall functionality and safety of the system.
Discuss the causes and fixes for B196C Dodge OBDII Code
Code B196C Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
