B196C Chrysler Code - Power Liftgate Close Direction Excessive Position Sensor Counts
Quick Answer
The Power Liftgate Module monitors the Power Liftgate Close Direction. Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Faulty Liftgate Latch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B196C Chrysler indicates Power Liftgate Close Direction Excessive Position Sensor Counts.
- Common causes
- Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Faulty Liftgate Latch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B196C Chrysler Description
What are the Possible Causes of the DTC B196C Chrysler?
- Binding Liftgate
- Faulty Liftgate Drive Unit
- Faulty Liftgate Latch
- Faulty Power Liftgate Module
How to Fix the DTC B196C Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B196C Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B196C Chrysler code?
Need more information on how to fix the B196C Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B196C Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B196C Chrysler Code
1. What are the common symptoms of OBDII code B196C in Chrysler vehicles?
The common symptoms include the power liftgate closing abruptly or with excessive force, the liftgate not closing correctly, and the liftgate motor running continuously.
2. What can cause the OBDII code B196C in Chrysler vehicles?
The code B196C is typically triggered by issues with the power liftgate close direction excessive position sensor counts, such as sensor misalignment, wiring issues, or sensor failure.
3. How can I diagnose the cause of OBDII code B196C in my Chrysler vehicle?
To diagnose the issue, you can use a diagnostic scanner to read the fault codes, inspect the power liftgate sensors for proper alignment and connection, and perform a sensor calibration procedure if necessary.
4. Is it safe to continue driving with OBDII code B196C present in my Chrysler vehicle?
It is not recommended to drive with the B196C code active, as it can affect the proper operation of the power liftgate and potentially lead to safety hazards or further damage.
5. Can I repair OBDII code B196C in my Chrysler vehicle myself?
Depending on your level of automotive expertise, you may be able to address the issue by realigning or replacing the power liftgate close direction sensors, checking the wiring for any damage, or performing a sensor calibration. However, professional assistance may be required for accurate diagnosis and repair.
6. How much does it cost to repair OBDII code B196C in a Chrysler vehicle?
The cost of repairing the B196C code can vary depending on the underlying issue, the need for replacement parts, and labor costs. It is advisable to obtain quotes from reputable automotive shops for an accurate estimate.
7. Can resetting the OBDII system clear the B196C code in my Chrysler vehicle?
While resetting the OBDII system may temporarily clear the code, it will not fix the underlying issue causing the B196C fault. It is recommended to diagnose and address the root cause of the problem for a lasting repair.
8. Are there any recalls or technical service bulletins related to OBDII code B196C in Chrysler vehicles?
Chrysler may have issued recalls or technical service bulletins related to the B196C code in certain vehicle models. It is advisable to check with the manufacturer or authorized dealerships for any relevant information.
9. What are the potential risks of ignoring OBDII code B196C in my Chrysler vehicle?
Ignoring the B196C code can lead to continued malfunction of the power liftgate, potential safety hazards, and additional damage to the liftgate system. It is best to address the issue promptly to ensure safe operation of the vehicle.
10. How long does it typically take to repair OBDII code B196C in a Chrysler vehicle?
The repair time for the B196C code can vary depending on the specific cause of the issue, the availability of parts, and the shop's workload. Simple sensor realignment or replacement may take a few hours, while more complex repairs could require additional time for diagnosis and labor.
Discuss the causes and fixes for B196C Chrysler OBDII Code
Code B196C Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
