AutoCodes – Jeep – B196B Jeep

B196B Jeep Code - Power Liftgate Close Direction Excessive Time

Quick Answer

The Power Liftgate Module monitors the Power Liftgate Close Direction. Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Liftgate Drive Unit harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B196B Jeep indicates Power Liftgate Close Direction Excessive Time.
Common causes: Common causes include Binding Liftgate, Faulty Liftgate Drive Unit, Liftgate Drive Unit harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 546

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 31, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B196B Jeep Description

The Power Liftgate Module monitors the Power Liftgate Close Direction. The Power Liftgate Module sets the OBDII code when the drive motor has taken longer than 15 seconds to complete a close command or 20 seconds with the engine cranking.

OBDII Code B196B Jeep - Power Liftgate Close Direction Excessive Time - AutoCodes.com — B196B Jeep Code - Power Liftgate Close Direction Excessive Time

What does this mean?

What are the Possible Causes of the DTC B196B Jeep?

Binding Liftgate
Faulty Liftgate Drive Unit
Liftgate Drive Unit harness is open or shorted
Liftgate Drive Unit circuit poor electrical connection
Faulty Power Liftgate Module

How to Fix the DTC B196B Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B196B Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B196B Jeep code?

Need more information on how to fix the B196B Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B196B Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B196B Jeep Code

1. What does OBDII code B196B mean on a Jeep?

Code B196B indicates that the power liftgate took too long to close, suggesting an issue with the liftgate's operation or related components.

2. What are the common symptoms of code B196B in a Jeep?

Symptoms may include the liftgate failing to close completely, closing very slowly, or stopping midway during the closing process.

3. What causes the B196B code to trigger?

Common causes include mechanical obstructions, a faulty liftgate motor, damaged wiring, or issues with the liftgate control module.

4. Can a dirty liftgate sensor cause the B196B code?

Yes, a dirty or misaligned liftgate sensor can affect the operation and cause the liftgate to take too long to close, triggering the code.

5. How do I diagnose the B196B code in my Jeep?

Start by inspecting the liftgate for physical obstructions, check the motor and hinges for wear, and use a diagnostic scanner to monitor the liftgate system's performance.

6. Can I still use the liftgate if the B196B code is active?

You may be able to use the liftgate manually or partially, but the automatic closing function may not work properly until the issue is resolved.

7. Is the B196B code related to the liftgate motor?

It can be. A weak or failing liftgate motor may struggle to close the liftgate in the expected time, leading to this code.

8. How do I fix the B196B code on a Jeep?

Fixes may include removing obstructions, cleaning or realigning sensors, repairing wiring, or replacing the liftgate motor or control module.

9. Will clearing the B196B code solve the problem?

Clearing the code may temporarily turn off the warning, but the issue will return unless the underlying cause is addressed.

10. How much does it cost to fix the B196B code?

The cost depends on the cause, ranging from cleaning sensors (low cost) to replacing the liftgate motor or control module (higher cost), typically between $100 and $500.