AutoCodes – Jeep – B1969 Jeep

B1969 Jeep Code - Power Liftgate Open Direction Excessive Position Sensor Counts

Quick Answer

If the Power Liftgate (PLG) Module detects that the Power Liftgate Drive Unit has generated excessive pulses during a full power cycle, this Diagnostic Trouble Code (DTC) will set. Common causes include Binding Liftgate, Faulty Full Open Switch, Full Open Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1969 Jeep indicates Power Liftgate Open Direction Excessive Position Sensor Counts.
Common causes: Common causes include Binding Liftgate, Faulty Full Open Switch, Full Open Switch harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,033

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 31, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1969 Jeep Description

If the Power Liftgate (PLG) Module detects that the Power Liftgate Drive Unit has generated excessive pulses during a full power cycle, this Diagnostic Trouble Code (DTC) will set.

OBDII Code B1969 Jeep - Power Liftgate Open Direction Excessive Position Sensor Counts - AutoCodes.com — B1969 Jeep Code - Power Liftgate Open Direction Excessive Position Sensor Counts

What does this mean?

What are the Possible Causes of the DTC B1969 Jeep?

Binding Liftgate
Faulty Full Open Switch
Full Open Switch harness is open or shorted
Full Open Switch circuit poor electrical connection
Faulty Power Liftgate Module

How to Fix the DTC B1969 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1969 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1969 Jeep code?

Need more information on how to fix the B1969 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1969 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1969 Jeep Code

1. What are common symptoms of OBDII code B1969 in a Jeep related to the power liftgate open direction excessive position sensor counts?

- Common symptoms include the power liftgate opening or closing too far, irregular movements, or failure to operate properly.

2. What could be causing the OBDII code B1969 in a Jeep?

- The code B1969 may be triggered by a faulty power liftgate open direction sensor, wiring issues, or problems with the liftgate control module.

3. How can I diagnose the issue related to code B1969 in my Jeep?

- Use a diagnostic scan tool to read the code and check the power liftgate system for any visible issues like loose connections or damaged sensors.

4. Can I continue to drive my Jeep with the B1969 code present?

- It is not recommended to drive the vehicle with the B1969 code active, as it can lead to further damage to the power liftgate system.

5. What are the repair options for fixing OBDII code B1969 in a Jeep?

- Repairs may involve replacing the faulty power liftgate open direction sensor, repairing damaged wiring, or reprogramming the liftgate control module.

6. Are there any DIY tips for resolving the B1969 code in my Jeep?

- DIY enthusiasts can start by checking the sensor connections, ensuring proper alignment of the liftgate, and examining the wiring for any visible damage.

7. How much does it typically cost to repair OBDII code B1969 in a Jeep?

- Repair costs can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Is the B1969 code a common issue with Jeep vehicles?

- The B1969 code related to the power liftgate position sensor counts can occur in Jeep vehicles with power liftgate systems, especially in models equipped with advanced features.

9. Can resetting the OBDII system clear the B1969 code in my Jeep?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.

10. How important is it to address the B1969 code in a Jeep promptly?

- It is essential to address the B1969 code promptly to ensure the proper functioning of the power liftgate system and avoid potential safety hazards or further damage to the vehicle.