B1969 Dodge Code - Power Liftgate Open Direction Excessive Position Sensor Counts
Quick Answer
If the Power Liftgate (PLG) Module detects that the Power Liftgate Drive Unit has generated excessive pulses during a full power cycle, this Diagnostic Trouble Code (DTC) will set. Common causes include Binding Liftgate, Faulty Full Open Switch, Full Open Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1969 Dodge indicates Power Liftgate Open Direction Excessive Position Sensor Counts.
- Common causes
- Common causes include Binding Liftgate, Faulty Full Open Switch, Full Open Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1969 Dodge Description
What are the Possible Causes of the DTC B1969 Dodge?
- Binding Liftgate
- Faulty Full Open Switch
- Full Open Switch harness is open or shorted
- Full Open Switch circuit poor electrical connection
- Faulty Power Liftgate Module
How to Fix the DTC B1969 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1969 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1969 Dodge code?
Need more information on how to fix the B1969 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1969 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1969 Dodge Code
1. What are the common symptoms of OBDII code B1969 in a Dodge related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
The common symptoms include the power liftgate opening or closing too far, irregular liftgate operation, warning lights on the dashboard, and potential safety concerns.
2. What could cause the OBDII code B1969 in a Dodge related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
Possible causes include a malfunctioning liftgate position sensor, wiring issues, faulty control module, or mechanical obstructions hindering the liftgate movement.
3. How can I diagnose the issue related to OBDII code B1969 in a Dodge Power Liftgate Open Direction Excessive Position Sensor Counts?
You can start by visually inspecting the liftgate components, checking the wiring for any damage, and using a diagnostic scanner to read the trouble codes and sensor data related to the liftgate position.
4. Are there any simple DIY repairs for OBDII code B1969 in a Dodge Power Liftgate Open Direction Excessive Position Sensor Counts?
Simple repairs include checking and resetting the liftgate position sensor, ensuring proper alignment of the liftgate, and clearing the trouble codes with a diagnostic tool.
5. Should I continue to use the power liftgate if OBDII code B1969 is triggered in a Dodge?
It is recommended to avoid using the power liftgate until the issue causing the code is diagnosed and repaired to prevent further damage or safety hazards.
6. Can resetting the power liftgate system help clear the OBDII code B1969 in a Dodge?
Resetting the power liftgate system may temporarily clear the code, but it is essential to investigate the root cause of the issue to prevent the code from reoccurring.
7. How much does it typically cost to repair OBDII code B1969 in a Dodge related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
The repair cost can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Is it safe to drive the vehicle with OBDII code B1969 related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
It is generally safe to drive the vehicle with this code, but it is advisable to get the issue diagnosed and repaired promptly to avoid any potential safety risks or further damage to the liftgate system.
9. Can extreme weather conditions affect the operation of the power liftgate and trigger OBDII code B1969 in a Dodge?
Yes, extreme weather conditions such as extreme cold or heat can affect the liftgate system's operation and potentially trigger sensor-related trouble codes like B1969. Regular maintenance and care can help mitigate these effects.
10. How long does it typically take to repair OBDII code B1969 in a Dodge related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
The repair duration can vary based on the specific cause of the issue and the availability of parts, but it may take a few hours to a day for a mechanic to diagnose and fix the problem.
Discuss the causes and fixes for B1969 Dodge OBDII Code
Code B1969 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
