B1969 Chrysler Code - Power Liftgate Open Direction Excessive Position Sensor Counts
Quick Answer
If the Power Liftgate (PLG) Module detects that the Power Liftgate Drive Unit has generated excessive pulses during a full power cycle, this Diagnostic Trouble Code (DTC) will set. Common causes include Binding Liftgate, Faulty Full Open Switch, Full Open Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1969 Chrysler indicates Power Liftgate Open Direction Excessive Position Sensor Counts.
- Common causes
- Common causes include Binding Liftgate, Faulty Full Open Switch, Full Open Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1969 Chrysler Description
What are the Possible Causes of the DTC B1969 Chrysler?
- Binding Liftgate
- Faulty Full Open Switch
- Full Open Switch harness is open or shorted
- Full Open Switch circuit poor electrical connection
- Faulty Power Liftgate Module
How to Fix the DTC B1969 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1969 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1969 Chrysler code?
Need more information on how to fix the B1969 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1969 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1969 Chrysler Code
1. What are the common symptoms of OBDII code B1969 in a Chrysler related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
- The common symptoms include a malfunctioning power liftgate that opens too far or fails to close properly.
2. What could cause the OBDII code B1969 in a Chrysler to trigger?
- The code B1969 is typically triggered by issues with the power liftgate sensor, such as misalignment, damage, or electrical problems.
3. How can I diagnose the OBDII code B1969 in my Chrysler with the Power Liftgate Open Direction Excessive Position Sensor Counts?
- Diagnosis involves checking the power liftgate sensor for proper alignment, damage, and electrical connections. A scan tool can be used to read the code and monitor sensor data.
4. What are some repair tips for fixing OBDII code B1969 in a Chrysler related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
- Repair tips include adjusting the sensor alignment, repairing any damaged wiring, or replacing the sensor if necessary. Calibration of the sensor may also be required.
5. Can I drive my Chrysler with the OBDII code B1969 related to the Power Liftgate Open Direction Excessive Position Sensor Counts?
- It is not recommended to drive the vehicle with a malfunctioning power liftgate, as it may pose a safety hazard. It is best to address the issue promptly.
6. Will resetting the OBDII code B1969 in my Chrysler fix the Power Liftgate Open Direction Excessive Position Sensor Counts issue?
- Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the power liftgate malfunction.
7. Is it possible to fix the OBDII code B1969 related to the Power Liftgate Open Direction Excessive Position Sensor Counts without professional help?
- Depending on your experience and tools available, you may be able to realign or repair the sensor yourself. However, complex repairs or sensor replacement may require professional assistance.
8. How much does it typically cost to repair the OBDII code B1969 in a Chrysler due to the Power Liftgate Open Direction Excessive Position Sensor Counts?
- The cost of repair can vary based on the extent of the issue and whether the sensor needs realignment, repair, or replacement. Costs may range from a few hundred to over a thousand dollars.
9. Are there any recalls or technical service bulletins (TSBs) related to OBDII code B1969 in Chrysler vehicles with the Power Liftgate Open Direction Excessive Position Sensor Counts?
- It is recommended to check with your Chrysler dealership or online resources for any recalls or TSBs related to this specific OBDII code to see if there are any related issues addressed by the manufacturer.
10. How can I prevent the recurrence of OBDII code B1969 in my Chrysler due to the Power Liftgate Open Direction Excessive Position Sensor Counts?
- Regularly inspecting and maintaining the power liftgate sensor, ensuring proper alignment, and addressing any issues promptly can help prevent the reoccurrence of the code B1969 in your Chrysler.
Discuss the causes and fixes for B1969 Chrysler OBDII Code
Code B1969 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
