AutoCodes – Jeep – B1963 Jeep

B1963 Jeep Code - Power Liftgate Strut Performance

Quick Answer

This Diagnostic Trouble Code (DTC) is designed to detect a failed gas prop which will cause the liftgate to free fall at the top of an open cycle. Common causes include Weak Strut, Cold Weather Condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1963 Jeep indicates Power Liftgate Strut Performance.
Common causes: Common causes include Weak Strut, Cold Weather Condition.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,331

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 31, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1963 Jeep Description

This Diagnostic Trouble Code (DTC) is designed to detect a failed gas prop which will cause the liftgate to free fall at the top of an open cycle. This is accomplished by the liftgate position sensors 1 and 2 transmitting that information to the power liftgate module. This DTC can also be set by the operator pulling on the opened liftgate and closing it down to quickly (less than one second).

OBDII Code B1963 Jeep - Power Liftgate Strut Performance - AutoCodes.com — B1963 Jeep Code - Power Liftgate Strut Performance

What does this mean?

What are the Possible Causes of the DTC B1963 Jeep?

Weak Strut
Cold Weather Condition

How to Fix the DTC B1963 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1963 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1963 Jeep code?

Need more information on how to fix the B1963 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1963 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1963 Jeep Code

1. What are common symptoms of OBDII code B1963 in a Jeep related to Power Liftgate Strut Performance?

- Common symptoms include issues with the power liftgate not opening or closing properly, sluggish operation, or complete failure of the liftgate to function.

2. What could be causing the OBDII code B1963 in a Jeep related to Power Liftgate Strut Performance?

- The code B1963 usually indicates a fault with the power liftgate strut system, such as a malfunctioning strut, sensor issue, wiring problem, or a faulty control module.

3. How can I diagnose the OBDII code B1963 in a Jeep for Power Liftgate Strut Performance issues?

- Diagnosis typically involves conducting a visual inspection of the liftgate struts, checking the wiring and connectors, and using a diagnostic scan tool to retrieve specific error codes and data.

4. Are there any simple troubleshooting steps I can take for OBDII code B1963 related to Power Liftgate Strut Performance in my Jeep?

- You can start by checking the liftgate strut connections, ensuring there are no obstructions hindering movement, and resetting the liftgate system by disconnecting the battery for a few minutes.

5. Can I continue driving my Jeep with the OBDII code B1963 related to Power Liftgate Strut Performance?

- It is not advisable to continue driving with this issue, as a malfunctioning power liftgate can pose safety risks and may lead to further damage if left unaddressed.

6. How should I repair the OBDII code B1963 related to Power Liftgate Strut Performance in my Jeep?

- Repair options may include replacing the faulty liftgate strut, fixing wiring or connector issues, recalibrating the liftgate system, or reprogramming the control module as needed.

7. Is it possible to reset the OBDII code B1963 related to Power Liftgate Strut Performance in my Jeep without professional help?

- While you can attempt to reset the code by disconnecting the battery, it is recommended to have a professional diagnose and address the underlying issue to prevent recurrence.

8. Are there any recalls or technical service bulletins related to OBDII code B1963 in Jeep vehicles for Power Liftgate Strut Performance problems?

- It is advisable to check with your local Jeep dealership or manufacturer for any recalls or technical service bulletins related to the OBDII code B1963 and Power Liftgate Strut Performance issues.

9. Can weather conditions affect the performance of the power liftgate in a Jeep and trigger the OBDII code B1963?

- Extreme weather conditions, such as extreme cold or excessive heat, can potentially affect the performance of the power liftgate struts and may contribute to triggering the OBDII code B1963.

10. How can regular maintenance help prevent OBDII code B1963 related to Power Liftgate Strut Performance in my Jeep?

- Regular maintenance, including lubricating the liftgate struts, checking for any signs of wear or damage, and addressing any issues promptly, can help prevent the occurrence of the OBDII code B1963 and ensure proper liftgate performance.