AutoCodes – Dodge – B1955 Dodge

B1955 Dodge Code - Power Liftgate Latch Release Overcurrent

Quick Answer

The Power Liftgate Module monitors the Power Liftgate Latch. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1955 Dodge indicates Power Liftgate Latch Release Overcurrent.
Common causes: Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 638

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1955 Dodge Description

The Power Liftgate Module monitors the Power Liftgate Latch. The Power Liftgate Module sets the OBDII code when the latch cinch operation is longer than 4 seconds, and the latch motor stall current is less than 12 amps has been detected for over 500 ms with no ratchet or secondary switch transition.

OBDII Code B1955 Dodge - Power Liftgate Latch Release Overcurrent - AutoCodes.com — B1955 Dodge Code - Power Liftgate Latch Release Overcurrent

What does this mean?

What are the Possible Causes of the DTC B1955 Dodge?

Binding Liftgate
Faulty Latch Assembly
Latch Assembly harness is open or shorted
Latch Assembly circuit poor electrical connection
Faulty Power Liftgate Module

How to Fix the DTC B1955 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1955 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1955 Dodge code?

Need more information on how to fix the B1955 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1955 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1955 Dodge Code

1. What are common symptoms of OBDII code B1955 in a Dodge related to the Power Liftgate Latch Release Overcurrent issue?

The common symptoms include the power liftgate failing to open or close properly, intermittent power liftgate operation, and a warning light on the dashboard indicating an issue with the power liftgate system.

2. What could cause OBDII code B1955 to be triggered in a Dodge for the Power Liftgate Latch Release Overcurrent problem?

The code B1955 is typically triggered by an overcurrent condition in the power liftgate latch release circuit. This can be caused by a faulty latch release motor, a short circuit in the wiring, or a problem with the liftgate control module.

3. How can I diagnose the OBDII code B1955 in my Dodge related to the Power Liftgate Latch Release Overcurrent issue?

To diagnose the issue, you can use a diagnostic scan tool to retrieve the trouble code B1955. Then, inspect the wiring harness for any visible damage, test the power liftgate latch release motor for proper functioning, and check the liftgate control module for faults.

4. What are some repair tips for fixing OBDII code B1955 in a Dodge due to the Power Liftgate Latch Release Overcurrent problem?

Repair tips include replacing the faulty power liftgate latch release motor, repairing any damaged wiring in the circuit, and resetting the liftgate control module to clear the trouble code B1955.

5. Can I continue driving my Dodge with OBDII code B1955 related to the Power Liftgate Latch Release Overcurrent issue?

It is not recommended to continue driving the vehicle with the power liftgate malfunctioning, as it may pose a safety risk. It's best to have the issue diagnosed and repaired as soon as possible to ensure proper operation of the power liftgate system.

6. How much does it typically cost to repair OBDII code B1955 in a Dodge for the Power Liftgate Latch Release Overcurrent issue?

The cost of repairing OBDII code B1955 can vary depending on the specific cause of the problem. It may range from a few hundred dollars for a minor repair to over a thousand dollars for more extensive repairs involving parts replacement.

7. Will resetting the trouble code B1955 in my Dodge fix the Power Liftgate Latch Release Overcurrent issue permanently?

Simply resetting the trouble code B1955 may temporarily clear the warning light, but if the underlying issue causing the overcurrent condition persists, the code is likely to reappear. It's essential to diagnose and address the root cause of the problem for a permanent fix.

8. Are there any recalls or technical service bulletins related to OBDII code B1955 in Dodge vehicles for the Power Liftgate Latch Release Overcurrent issue?

It's advisable to check with the manufacturer or authorized Dodge service center for any open recalls or technical service bulletins related to OBDII code B1955 and the Power Liftgate Latch Release Overcurrent problem. They may have information on known issues and recommended repair procedures.

9. Is it possible to prevent OBDII code B1955 from occurring in my Dodge for the Power Liftgate Latch Release Overcurrent issue?

While some causes of OBDII code B1955 may be unpredictable, regular maintenance and inspection of the power liftgate system can help prevent issues like overcurrent conditions. Keeping the system clean, lubricated, and free from debris can contribute to its smooth operation and potentially reduce the risk of triggering the trouble code.

10. How long does it typically take to repair OBDII code B1955 in a Dodge for the Power Liftgate Latch Release Overcurrent issue?

The repair time for OBDII code B1955 can vary depending on the complexity of the issue and the availability of parts. Simple repairs may take a few hours, while more involved repairs could require a day or more to complete. It's advisable to consult with a qualified mechanic or service center for a more accurate estimate based on your specific situation.