AutoCodes – Jeep – B1953 Jeep

B1953 Jeep Code - Power Liftgate Latch Cinch Overcurrent

Quick Answer

The Power Liftgate Module monitors the Power Liftgate Latch Cinch. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1953 Jeep indicates Power Liftgate Latch Cinch Overcurrent.
Common causes: Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 693

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1953 Jeep Description

The Power Liftgate Module monitors the Power Liftgate Latch Cinch. The Power Liftgate Module sets the OBDII code when the latch motor stall current of 12.0 amps has been detected for over 500ms, with no ratchet switch transition.

OBDII Code B1953 Jeep - Power Liftgate Latch Cinch Overcurrent - AutoCodes.com — B1953 Jeep Code - Power Liftgate Latch Cinch Overcurrent

What does this mean?

What are the Possible Causes of the DTC B1953 Jeep?

Binding Liftgate
Faulty Latch Assembly
Latch Assembly harness is open or shorted
Latch Assembly circuit poor electrical connection
Faulty Power Liftgate Module

How to Fix the DTC B1953 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1953 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1953 Jeep code?

Need more information on how to fix the B1953 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1953 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1953 Jeep Code

What are common symptoms of OBDII code B1953 in a Jeep related to the Power Liftgate Latch Cinch Overcurrent issue?

- Common symptoms include the power liftgate not opening or closing properly, intermittent operation of the liftgate, and warning lights on the dashboard related to the liftgate system.

What are some possible causes of the OBDII code B1953 in a Jeep indicating the Power Liftgate Latch Cinch Overcurrent problem?

- Potential causes include a faulty power liftgate latch cinch mechanism, wiring issues in the liftgate system, a malfunctioning liftgate control module, or a short circuit in the system.

How can I diagnose the OBDII code B1953 in my Jeep for the Power Liftgate Latch Cinch Overcurrent issue?

- Diagnose the code by inspecting the wiring and connectors in the liftgate system, checking the condition of the liftgate latch cinch mechanism, and using a diagnostic scanner to retrieve specific fault codes and data related to the issue.

What are some repair tips for addressing the OBDII code B1953 in a Jeep related to the Power Liftgate Latch Cinch Overcurrent fault?

- Repair tips include checking and repairing any damaged wiring or connectors, replacing the faulty liftgate latch cinch mechanism, resetting the liftgate control module, and clearing the fault codes with a diagnostic scanner after repairs.

Is it safe to continue driving my Jeep with the OBDII code B1953 indicating the Power Liftgate Latch Cinch Overcurrent issue?

- It is not recommended to continue driving the vehicle with this issue, as it may lead to further damage to the liftgate system and potentially cause safety hazards. It is advised to address the problem promptly.

What tools or equipment may be needed to repair the OBDII code B1953 in a Jeep related to the Power Liftgate Latch Cinch Overcurrent issue?

- Common tools and equipment that may be needed include a diagnostic scanner, multimeter for testing electrical circuits, basic hand tools for accessing components in the liftgate system, and replacement parts if necessary.

Can I reset the OBDII code B1953 in my Jeep indicating the Power Liftgate Latch Cinch Overcurrent problem without fixing the underlying issue?

- While you can clear the fault code with a diagnostic scanner, it is essential to address the root cause of the problem to prevent the code from reoccurring. Resetting the code without fixing the issue may lead to ongoing liftgate system malfunctions.

Are there any recalls or technical service bulletins (TSBs) related to the OBDII code B1953 in a Jeep for the Power Liftgate Latch Cinch Overcurrent issue?

- It is advisable to check with your local Jeep dealership or online resources for any recalls or TSBs related to this specific OBDII code. Manufacturers may provide guidance or solutions for known issues related to the Power Liftgate Latch Cinch Overcurrent problem.