B1953 Chrysler Code - Power Liftgate Latch Cinch Overcurrent
Quick Answer
The Power Liftgate Module monitors the Power Liftgate Latch Cinch. Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1953 Chrysler indicates Power Liftgate Latch Cinch Overcurrent.
- Common causes
- Common causes include Binding Liftgate, Faulty Latch Assembly, Latch Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1953 Chrysler Description
What are the Possible Causes of the DTC B1953 Chrysler?
- Binding Liftgate
- Faulty Latch Assembly
- Latch Assembly harness is open or shorted
- Latch Assembly circuit poor electrical connection
- Faulty Power Liftgate Module
How to Fix the DTC B1953 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1953 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1953 Chrysler code?
Need more information on how to fix the B1953 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1953 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1953 Chrysler Code
1. What are the common symptoms of OBDII code B1953 in a Chrysler related to the Power Liftgate Latch Cinch Overcurrent issue?
The common symptoms include the power liftgate not closing properly, intermittent operation of the liftgate, and a warning light on the dashboard.
2. What can cause the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent issue?
The issue is typically caused by a fault in the power liftgate latch cinch overcurrent circuit, which may be due to a damaged wiring harness, a faulty latch cinch motor, or a malfunctioning control module.
3. How can I diagnose the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent problem?
Diagnosis involves using a scan tool to retrieve the specific fault code, inspecting the wiring harness for any visible damage, testing the latch cinch motor for proper function, and checking the control module for any faults.
4. Can I continue to use the power liftgate if the B1953 code is present in my Chrysler?
It is not recommended to continue using the power liftgate if the B1953 code is present, as it indicates a potential safety issue with the latch cinch overcurrent. It is advisable to have the problem diagnosed and repaired promptly.
5. What are some repair tips for addressing the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent issue?
Repair tips may include repairing or replacing damaged wiring, replacing the faulty latch cinch motor, resetting the control module, and clearing the fault code with a scan tool after the repairs are completed.
6. Is the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent a common issue in Chrysler vehicles?
While it may not be as common as some other OBDII codes, the Power Liftgate Latch Cinch Overcurrent issue can occur in Chrysler vehicles with power liftgates, particularly in models equipped with this feature.
7. Can the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent problem be fixed at home, or is professional repair necessary?
Depending on your automotive repair skills and access to tools, you may be able to address the issue at home. However, due to the complexity of the power liftgate system, professional repair may be recommended for accurate diagnosis and proper repair.
8. How much does it typically cost to repair the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent issue?
The cost of repair can vary based on the specific cause of the problem, the extent of the damage, and whether you choose to address it yourself or seek professional help. Costs may include parts, labor, and diagnostic fees.
9. Are there any preventative measures to avoid encountering the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent issue?
To help prevent the issue, you can regularly inspect the power liftgate system for any signs of wear or damage, avoid overloading the liftgate, and ensure proper maintenance of the vehicle's electrical components.
10. Will resetting the OBDII code B1953 Chrysler Power Liftgate Latch Cinch Overcurrent issue make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue causing the code is not addressed and repaired, the problem is likely to recur. It is important to diagnose and fix the root cause of the problem for a permanent solution.
Discuss the causes and fixes for B1953 Chrysler OBDII Code
Code B1953 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
