B1942 2013 Toyota RAV4 Code - Short to Ground in Selectable Force Limiter Squib Right Circuit
Quick Answer
The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1942 2013 Toyota RAV4 indicates Short to Ground in Selectable Force Limiter Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1942 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B1942 2013 Toyota RAV4?
- Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
- Front Seat Outer Belt Assembly Right harness is open or shorted
- Front Seat Outer Belt Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1942 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1942 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1942 2013 Toyota RAV4 code?
Need more information on how to fix the B1942 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1942 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1942 2013 Toyota RAV4 Code
1. What does OBDII code B1942 mean for my 2013 Toyota RAV4?
- The code B1942 indicates a Short to Ground in the Selectable Force Limiter Squib Right Circuit in your vehicle's restraint system.
2. What are the common symptoms of OBDII code B1942 in a Toyota RAV4?
- Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the right side airbag system.
3. What are the possible causes of OBDII code B1942 in a 2013 Toyota RAV4?
- The code B1942 can be triggered by wiring issues, a faulty squib (airbag inflator), or a malfunction in the restraint control module.
4. How can I diagnose the cause of OBDII code B1942 in my Toyota RAV4?
- To diagnose the issue, you may need to perform a thorough inspection of the wiring harness, connectors, and components in the Selectable Force Limiter Squib Right Circuit.
5. Is it safe to drive my Toyota RAV4 with OBDII code B1942?
- It is not recommended to drive the vehicle with an unresolved airbag system fault as it could compromise your safety in the event of a collision.
6. How can I repair OBDII code B1942 in my 2013 Toyota RAV4?
- Repairing the B1942 code may involve repairing or replacing damaged wiring, fixing faulty connectors, or replacing the squib or restraint control module as needed.
7. Can I reset OBDII code B1942 in my Toyota RAV4 using a diagnostic tool?
- While you can clear the code with a diagnostic tool, it is crucial to address the underlying issue causing the fault to prevent it from recurring.
8. How much does it typically cost to repair OBDII code B1942 in a Toyota RAV4?
- The cost of repairing the B1942 code can vary depending on the specific cause of the fault, with expenses ranging from a few hundred to over a thousand dollars.
9. Will OBDII code B1942 cause my Toyota RAV4 to fail a state inspection?
- Yes, a B1942 fault in the airbag system is a safety concern and can lead to a failed state inspection due to the potential risk it poses in a collision.
10. How long does it take to repair OBDII code B1942 in a 2013 Toyota RAV4?
- The repair time for OBDII code B1942 can vary based on the complexity of the issue, but it may take a few hours to a day for a professional technician to diagnose and fix the problem.
Discuss the causes and fixes for B1942 2013 Toyota RAV4 OBDII Code
Code B1942 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
