B1941 2017 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit
Quick Answer
The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1941 2017 Toyota RAV4 indicates Open in Selectable Force Limiter Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1941 2017 Toyota RAV4 Description
What are the Possible Causes of the DTC B1941 2017 Toyota RAV4?
- Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
- Front Seat Outer Belt Assembly Right harness is open or shorted
- Front Seat Outer Belt Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1941 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1941 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1941 2017 Toyota RAV4 code?
Need more information on how to fix the B1941 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1941 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1941 2017 Toyota RAV4 Code
1. What does the OBDII code B1941 mean on a 2017 Toyota RAV4?
The B1941 code indicates an "Open in Selectable Force Limiter Squib Right Circuit," meaning there is an issue with the wiring or connection in the right-side seat belt force limiter system.
2. What are the common symptoms of the B1941 code in a 2017 Toyota RAV4?
Symptoms include the airbag warning light illuminating on the dashboard and potential deactivation of the seatbelt force limiter system.
3. What typically causes the B1941 code to appear?
Common causes include damaged wiring, a loose or corroded connector, or a faulty seat belt pretensioner assembly.
4. Can I continue driving my 2017 Toyota RAV4 with the B1941 code active?
While the vehicle may still be drivable, the seatbelt force limiter and airbag systems may not function correctly in an accident, posing a safety risk.
5. How is the B1941 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the wiring and connectors in the right-side seatbelt system, and test the resistance in the squib circuit.
6. What repairs are needed to fix the B1941 code?
Repairs may involve reconnecting or replacing damaged wiring, cleaning corroded connectors, or replacing the seat belt pretensioner assembly.
7. Can I fix the B1941 code on my own?
If you have electrical knowledge and the proper tools, you may inspect and repair wiring or connectors, but it's recommended to have a professional handle airbag and safety system repairs.
8. How much does it cost to repair the B1941 code on a 2017 Toyota RAV4?
Repair costs can vary from $100 for minor wiring repairs to over $500 if the seat belt pretensioner assembly needs replacement.
9. Does the B1941 code affect the airbag system?
Yes, the code can indicate a fault that may prevent the airbag system from deploying correctly in a collision.
10. How can I prevent the B1941 code from recurring?
Regularly inspect seatbelt components for wear, avoid yanking on seatbelts, and ensure connectors remain secure and free from corrosion.
Discuss the causes and fixes for B1941 2017 Toyota RAV4 OBDII Code
Code B1941 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
