AutoCodes – Toyota – B1941 2016 Toyota RAV4

B1941 2016 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit

Quick Answer

The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1941 2016 Toyota RAV4 indicates Open in Selectable Force Limiter Squib Right Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 252

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 07, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1941 2016 Toyota RAV4 Description

The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Selectable Force Limiter Squib Right Circuit.

OBDII Code B1941 2016 Toyota RAV4 - Open in Selectable Force Limiter Squib Right Circuit - AutoCodes.com — B1941 2016 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit

What does this mean?

What are the Possible Causes of the DTC B1941 2016 Toyota RAV4?

Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
Front Seat Outer Belt Assembly Right harness is open or shorted
Front Seat Outer Belt Assembly Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1941 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1941 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1941 2016 Toyota RAV4 code?

Need more information on how to fix the B1941 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1941 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1941 2016 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1941 in a 2016 Toyota RAV4?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the right side seatbelt pretensioner.

2. What does the OBDII code B1941 "Open in Selectable Force Limiter Squib Right Circuit" mean for a 2016 Toyota RAV4?

- This code indicates a problem with the circuit responsible for controlling the force limiter on the right side seatbelt pretensioner.

3. What are the possible causes of OBDII code B1941 in a 2016 Toyota RAV4?

- Possible causes include a faulty squib (initiator) in the right side seatbelt pretensioner, damaged wiring or connectors in the circuit, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B1941 in my 2016 Toyota RAV4?

- Diagnosis typically involves using a scan tool to retrieve the code, inspecting the wiring and connectors in the right side seatbelt pretensioner circuit, and testing the components for proper functionality.

5. Can I still drive my 2016 Toyota RAV4 with OBDII code B1941 present?

- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the seatbelt pretensioner system, which is crucial for occupant safety.

6. Is it possible to reset the OBDII code B1941 in a 2016 Toyota RAV4 without addressing the underlying issue?

- Resetting the code without fixing the underlying problem may temporarily turn off the warning light, but the code will likely return until the root cause is addressed.

7. How can I repair OBDII code B1941 in my 2016 Toyota RAV4?

- Repair may involve replacing the faulty squib in the right side seatbelt pretensioner, repairing damaged wiring or connectors, or reprogramming the airbag control module as needed.

8. Are there any safety precautions to consider when working on the seatbelt pretensioner system related to OBDII code B1941 in a 2016 Toyota RAV4?

- Yes, it is crucial to disconnect the vehicle's battery and follow proper safety procedures outlined in the service manual to avoid accidental deployment of the airbag system.

9. Can a DIY enthusiast with automotive repair experience address OBDII code B1941 in a 2016 Toyota RAV4?

- While some repairs related to this code may be possible for experienced DIY enthusiasts, it is recommended to consult a professional technician for proper diagnosis and repair to ensure safety and accuracy.

10. How much can I expect to pay for repairing OBDII code B1941 in a 2016 Toyota RAV4 at a dealership or automotive repair shop?

- Repair costs can vary depending on the specific issue and labor rates, but expect to budget for parts and labor costs potentially ranging from a few hundred to over a thousand dollars.