B1941 2015 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit
Quick Answer
The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1941 2015 Toyota RAV4 indicates Open in Selectable Force Limiter Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1941 2015 Toyota RAV4 Description
What are the Possible Causes of the DTC B1941 2015 Toyota RAV4?
- Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
- Front Seat Outer Belt Assembly Right harness is open or shorted
- Front Seat Outer Belt Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1941 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1941 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1941 2015 Toyota RAV4 code?
Need more information on how to fix the B1941 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1941 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1941 2015 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B1941 in a 2015 Toyota RAV4?
- The common symptoms include an illuminated airbag warning light on the dashboard and a possible non-deployment of the right side airbag during a collision.
2. What does the OBDII code B1941 "Open in Selectable Force Limiter Squib Right Circuit" mean for a 2015 Toyota RAV4?
- This code indicates that there is an open circuit in the selectable force limiter squib on the right side of the vehicle's airbag system.
3. What are some possible causes of the B1941 code in a 2015 Toyota RAV4?
- Potential causes include a faulty selectable force limiter squib, damaged wiring or connectors in the circuit, or issues with the airbag control module.
4. How can I diagnose the Open in Selectable Force Limiter Squib Right Circuit issue in my 2015 Toyota RAV4?
- Diagnosing this problem typically involves using a scan tool to retrieve the specific fault code, inspecting the airbag system's wiring and connectors, and testing the selectable force limiter squib for continuity.
5. Can I still drive my 2015 Toyota RAV4 with the B1941 fault code present?
- It is not recommended to drive the vehicle with an active airbag fault code, as it may compromise the effectiveness of the airbag system in the event of a collision.
6. How should I repair the Open in Selectable Force Limiter Squib Right Circuit issue in my 2015 Toyota RAV4?
- Repairing this issue usually involves replacing the faulty selectable force limiter squib, repairing any damaged wiring or connectors, and clearing the fault code from the airbag system.
7. Is it safe to reset the B1941 code in my 2015 Toyota RAV4 without fixing the underlying issue?
- It is not recommended to reset the code without addressing the root cause, as it may lead to a safety risk if the airbag system is not functioning properly.
8. Can a DIY enthusiast fix the Open in Selectable Force Limiter Squib Right Circuit problem in a 2015 Toyota RAV4?
- While some basic troubleshooting steps can be performed by a DIY enthusiast, repairing the airbag system should be left to experienced professionals due to the safety implications involved.
9. How much does it typically cost to repair the B1941 code in a 2015 Toyota RAV4?
- The cost of repairing the Open in Selectable Force Limiter Squib Right Circuit issue can vary depending on the specific cause of the problem, but it may range from a few hundred to over a thousand dollars.
10. How often does the B1941 fault code occur in 2015 Toyota RAV4 vehicles?
- The occurrence of the B1941 code can vary, but it is not a common issue in 2015 Toyota RAV4 models.
Discuss the causes and fixes for B1941 2015 Toyota RAV4 OBDII Code
Code B1941 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
