AutoCodes – Toyota – B1941 2014 Toyota RAV4

B1941 2014 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit

Quick Answer

The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1941 2014 Toyota RAV4 indicates Open in Selectable Force Limiter Squib Right Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 239

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 07, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1941 2014 Toyota RAV4 Description

The Selectable Force Limiter Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Selectable Force Limiter Squib Right Circuit.

OBDII Code B1941 2014 Toyota RAV4 - Open in Selectable Force Limiter Squib Right Circuit - AutoCodes.com — B1941 2014 Toyota RAV4 Code - Open in Selectable Force Limiter Squib Right Circuit

What does this mean?

What are the Possible Causes of the DTC B1941 2014 Toyota RAV4?

Faulty Front Seat Outer Belt Assembly Right (RH) (Selectable Force Limiter Squib Right)
Front Seat Outer Belt Assembly Right harness is open or shorted
Front Seat Outer Belt Assembly Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1941 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1941 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1941 2014 Toyota RAV4 code?

Need more information on how to fix the B1941 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1941 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1941 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1941 in a 2014 Toyota RAV4?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the airbags in the event of a collision.

2. What does the OBDII code B1941 "Open in Selectable Force Limiter Squib Right Circuit" mean for a 2014 Toyota RAV4?

- It indicates a potential issue with the selectable force limiter squib in the right circuit of the airbag system.

3. What are possible causes of OBDII code B1941 in a 2014 Toyota RAV4?

- The code may be triggered by a faulty selectable force limiter squib, damaged wiring or connectors in the right circuit, or a malfunction in the airbag control module.

4. How can I diagnose the cause of OBDII code B1941 in my 2014 Toyota RAV4?

- Diagnosing the issue may involve inspecting the wiring and connectors in the right circuit, testing the selectable force limiter squib, and using a scan tool to retrieve additional diagnostic information.

5. Is it safe to drive my 2014 Toyota RAV4 with OBDII code B1941 present?

- It is not recommended to drive the vehicle with an unresolved airbag system issue, as it may compromise the effectiveness of the airbags in the event of a collision.

6. Can I reset OBDII code B1941 in my 2014 Toyota RAV4 on my own?

- While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the fault code to prevent it from recurring.

7. How much does it cost to repair OBDII code B1941 in a 2014 Toyota RAV4?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the selectable force limiter squib, repairing damaged wiring, or reprogramming the airbag control module.

8. Are there any DIY tips for fixing OBDII code B1941 in a 2014 Toyota RAV4?

- DIY repairs for this code are not recommended due to the complexity and safety implications of working on the airbag system. It's best to consult a professional technician for proper diagnosis and repair.

9. Can OBDII code B1941 in a 2014 Toyota RAV4 be intermittent?

- Yes, the issue causing the fault code may be intermittent, but it should still be addressed promptly to ensure the proper functioning of the airbag system.

10. How long does it typically take to repair OBDII code B1941 in a 2014 Toyota RAV4?

- The repair time can vary depending on the specific cause of the issue and the availability of parts, but it may take a few hours to a full day to diagnose and fix the problem.