B1938 Mercury Code - Air Bag Passenger Circuit Short To Ground Fault
Quick Answer
The Restraints Control Module (RCM) checks all of the Passenger Air Bag Circuits for faults. Common causes include Faulty Passenger Air Bag Module, Passenger Air Bag Module harness is open or shorted, Passenger Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1938 Mercury indicates Air Bag Passenger Circuit Short To Ground Fault.
- Common causes
- Common causes include Faulty Passenger Air Bag Module, Passenger Air Bag Module harness is open or shorted, Passenger Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1938 Mercury Description
What are the Possible Causes of the DTC B1938 Mercury?
- Faulty Passenger Air Bag Module
- Passenger Air Bag Module harness is open or shorted
- Passenger Air Bag Module circuit poor electrical connection
- Faulty Restraint Control Module (RCM)
How to Fix the DTC B1938 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1938 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1938 Mercury code?
Need more information on how to fix the B1938 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1938 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1938 Mercury Code
1. What are common symptoms of OBDII code B1938 in a Mercury related to the airbag passenger circuit short to ground fault?
- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential non-deployment of the passenger side airbag during a collision.
2. What can cause the OBDII code B1938 in a Mercury indicating a short to ground fault in the airbag passenger circuit?
- Possible causes can include damaged wiring, a faulty airbag module, a defective passenger airbag, or a problem with the passenger seat sensor.
3. How can I diagnose the OBDII code B1938 in my Mercury to confirm a short to ground fault in the airbag passenger circuit?
- Diagnosis typically involves using a diagnostic scanner to retrieve the fault code, inspecting the wiring and connectors for damage, and testing the components in the passenger airbag system.
4. Is it safe to drive my Mercury with the OBDII code B1938 indicating a short to ground fault in the airbag passenger circuit?
- It is not recommended to drive the vehicle with this fault present, as it may compromise the functionality of the passenger airbag system in the event of a collision.
5. Can I reset the OBDII code B1938 in my Mercury related to the airbag passenger circuit short to ground fault?
- While clearing the fault code may temporarily turn off the warning light, it is important to address the underlying issue causing the fault to ensure the safety of the airbag system.
6. How much does it typically cost to repair the OBDII code B1938 in a Mercury for the airbag passenger circuit short to ground fault?
- Repair costs can vary depending on the specific cause of the fault, but they may involve replacing damaged wiring, repairing or replacing components in the airbag system, and conducting system testing.
7. Are there any DIY repair tips for addressing the OBDII code B1938 in a Mercury indicating a short to ground fault in the airbag passenger circuit?
- DIY repair for this fault is not recommended due to the safety implications of working on the airbag system. It is best to have the issue diagnosed and repaired by a qualified automotive technician.
8. How long does it take to repair the OBDII code B1938 in a Mercury for the airbag passenger circuit short to ground fault?
- Repair times can vary depending on the exact cause of the fault and the extent of the repairs needed. It is best to consult with a professional technician for an accurate estimate of repair time.
9. Can the OBDII code B1938 in a Mercury be triggered by factors other than a short to ground fault in the airbag passenger circuit?
- While the code typically points to a short to ground fault in the airbag passenger circuit, other factors such as a faulty sensor or module could potentially trigger the code. A thorough diagnosis is needed.
10. Is it necessary to have the OBDII code B1938 in a Mercury related to the airbag passenger circuit short to ground fault repaired immediately?
- Yes, it is crucial to address this fault promptly to ensure the proper functioning of the airbag system and maintain the safety of the vehicle occupants in the event of an accident.
Discuss the causes and fixes for B1938 Mercury OBDII Code
Code B1938 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
