B1934 Mercury Code - Air Bag Driver Inflator Circuit Resistance Low On Squib Fault
Quick Answer
The Restraints Control Module (RCM) checks all of the Driver Air Bag Module Squib 1 circuits for faults. Common causes include Faulty Driver Air Bag Module, Driver Air Bag Module harness is open or shorted, Driver Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1934 Mercury indicates Air Bag Driver Inflator Circuit Resistance Low On Squib Fault.
- Common causes
- Common causes include Faulty Driver Air Bag Module, Driver Air Bag Module harness is open or shorted, Driver Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1934 Mercury Description
What are the Possible Causes of the DTC B1934 Mercury?
- Faulty Driver Air Bag Module
- Driver Air Bag Module harness is open or shorted
- Driver Air Bag Module circuit poor electrical connection
- Faulty Clockspring
- Faulty Restraint Control Module (RCM)
How to Fix the DTC B1934 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1934 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1934 Mercury code?
Need more information on how to fix the B1934 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1934 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1934 Mercury Code
1. What are common symptoms of OBDII code B1934 Mercury?
- Common symptoms include the airbag warning light illuminating on the dashboard, as well as potential issues with the airbag system's functionality.
2. What does the OBDII code B1934 Mercury indicate?
- This code indicates a problem with the air bag driver inflator circuit's resistance being too low on the squib fault.
3. What are some possible causes of OBDII code B1934 Mercury?
- Possible causes include a faulty airbag inflator, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.
4. How can I diagnose the issue related to OBDII code B1934 Mercury?
- Diagnosing the issue involves using a diagnostic scanner to retrieve the trouble code and then performing further testing on the airbag system components to pinpoint the exact cause.
5. Is it safe to drive with OBDII code B1934 Mercury present?
- It is not recommended to drive with this code present, as it indicates a potential problem with the airbag system's ability to deploy in the event of a collision.
6. Can I reset the OBDII code B1934 Mercury on my own?
- While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.
7. How much does it typically cost to repair OBDII code B1934 Mercury?
- Repair costs can vary depending on the exact cause of the issue, but expect to pay for parts and labor related to replacing faulty components in the airbag system.
8. Are there any safety precautions to take when working on the airbag system related to OBDII code B1934 Mercury?
- It is crucial to disconnect the vehicle's battery and wait for the recommended time before working on the airbag system to avoid accidental deployment and potential injuries.
9. Can a DIY enthusiast repair OBDII code B1934 Mercury themselves?
- While some basic troubleshooting and repairs can be done by experienced DIY enthusiasts, working on the airbag system should be left to professionals due to safety and complexity concerns.
10. How often should I have the airbag system inspected to prevent OBDII code B1934 Mercury from appearing?
- It is recommended to have the airbag system inspected regularly as part of routine maintenance to catch any potential issues early and prevent codes like B1934 from appearing.
Discuss the causes and fixes for B1934 Mercury OBDII Code
Code B1934 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
