AutoCodes – Generic – B1920

B1920 Code - Air Bag Passenger Circuit Failure

Quick Answer

The Air Bag Control Module monitors the Air Bag Passenger Circuit. Common causes include Faulty Air Bag Control Module, Air Bag Control Module harness is open or shorted, Air Bag Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1920 indicates Air Bag Passenger Circuit Failure.
Common causes: Common causes include Faulty Air Bag Control Module, Air Bag Control Module harness is open or shorted, Air Bag Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,576

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 28, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1920 Description

The Air Bag Control Module monitors the Air Bag Passenger Circuit. The Air Bag Control Module sets the OBDII code when the Air Bag Passenger Circuit is not to factory specifications.

OBDII Code B1920 - Air Bag Passenger Circuit Failure - AutoCodes.com — B1920 Code - Air Bag Passenger Circuit Failure

What does this mean?

What are the Possible Causes of the DTC B1920?

Faulty Air Bag Control Module
Air Bag Control Module harness is open or shorted
Air Bag Control Module circuit poor electrical connection

How to Fix the DTC B1920?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1920 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1920 code?

Need more information on how to fix the B1920 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1920 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1920 Lexus — Short In Rear Pretensioner Squib RH Circuit
B1920 Scion — Short In Rear Pretensioner Squib RH Circuit
B1920 Toyota — Short In Rear Pretensioner Squib RH Circuit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.