AutoCodes – Scion – B1907 Scion

B1907 Scion Code - Short to Ground in Front Pretensioner Squib Left Circuit

Quick Answer

The Front Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Left (LH). Common causes include Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left), Front Seat Outer Belt Assembly Left is open or shorted, Front Seat Outer Belt Assembly Left poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1907 Scion indicates Short to Ground in Front Pretensioner Squib Left Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left), Front Seat Outer Belt Assembly Left is open or shorted, Front Seat Outer Belt Assembly Left poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 940

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 07, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1907 Scion Description

The Front Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Left (LH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Front Pretensioner Squib Left Circuit.

OBDII Code B1907 Scion - Short to Ground in Front Pretensioner Squib Left Circuit - AutoCodes.com — B1907 Scion Code - Short to Ground in Front Pretensioner Squib Left Circuit

What does this mean?

What are the Possible Causes of the DTC B1907 Scion?

Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left)
Front Seat Outer Belt Assembly Left is open or shorted
Front Seat Outer Belt Assembly Left poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1907 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1907 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1907 Scion code?

Need more information on how to fix the B1907 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1907 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1907 Scion Code

1. What are the common symptoms of OBDII code B1907 in a Scion related to the Front Pretensioner Squib Left Circuit?

The common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the seatbelt pretensioner system.

2. What does the OBDII code B1907 Scion indicate about the Front Pretensioner Squib Left Circuit?

This code indicates a short to ground in the front pretensioner squib left circuit, which can affect the proper deployment of the seatbelt pretensioner in the event of a collision.

3. What are the possible causes of OBDII code B1907 in a Scion?

Possible causes include damaged wiring in the front pretensioner squib left circuit, a faulty seatbelt pretensioner squib, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B1907 in my Scion?

Diagnosing the issue involves using a scan tool to retrieve the specific fault code, inspecting the wiring and connectors in the front pretensioner squib left circuit, and testing the seatbelt pretensioner system components for proper functionality.

5. Can I repair OBDII code B1907 in my Scion on my own?

Repairing this issue may require advanced knowledge and specialized tools, so it is recommended to seek assistance from a qualified mechanic or dealership to properly diagnose and repair the problem.

6. Are there any safety concerns associated with OBDII code B1907 in a Scion?

Yes, unresolved issues related to the front pretensioner squib left circuit can affect the proper operation of the seatbelt pretensioner system, compromising occupant safety in the event of a collision.

7. How much does it typically cost to repair OBDII code B1907 in a Scion?

The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing damaged wiring, faulty components, or reprogramming the airbag control module, which can range from a few hundred to over a thousand dollars.

8. Can ignoring OBDII code B1907 impact the overall functionality of my Scion?

Ignoring this code can potentially compromise the effectiveness of the seatbelt pretensioner system and overall safety features of your vehicle, so it is important to address the issue promptly.

9. Is it safe to drive my Scion with OBDII code B1907 present?

It is not recommended to drive the vehicle with this code present, as it indicates a problem with the seatbelt pretensioner system, which is a critical safety component in the event of a collision.

10. How can I prevent OBDII code B1907 from occurring in my Scion in the future?

Regular maintenance, including inspecting the wiring harness and connectors in the seatbelt pretensioner system, can help prevent issues that may trigger this fault code in the future.