AutoCodes – Toyota – B1907 2013 Toyota RAV4

B1907 2013 Toyota RAV4 Code - Short to Ground in Front Pretensioner Squib Left Circuit

Quick Answer

The Front Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Left (LH). Common causes include Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left), Front Seat Outer Belt Assembly Left is open or shorted, Front Seat Outer Belt Assembly Left poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1907 2013 Toyota RAV4 indicates Short to Ground in Front Pretensioner Squib Left Circuit.
Common causes: Common causes include Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left), Front Seat Outer Belt Assembly Left is open or shorted, Front Seat Outer Belt Assembly Left poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 331

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 07, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1907 2013 Toyota RAV4 Description

The Front Pretensioner Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Left (LH). This circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Front Pretensioner Squib Left Circuit.

OBDII Code B1907 2013 Toyota RAV4 - Short to Ground in Front Pretensioner Squib Left Circuit - AutoCodes.com — B1907 2013 Toyota RAV4 Code - Short to Ground in Front Pretensioner Squib Left Circuit

What does this mean?

What are the Possible Causes of the DTC B1907 2013 Toyota RAV4?

Faulty Front Seat Outer Belt Assembly Left (LH) (Front Pretensioner Squib Left)
Front Seat Outer Belt Assembly Left is open or shorted
Front Seat Outer Belt Assembly Left poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1907 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1907 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1907 2013 Toyota RAV4 code?

Need more information on how to fix the B1907 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1907 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1907 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1907 in a 2013 Toyota RAV4?

The common symptoms of code B1907 include the airbag warning light illuminating on the dashboard and potential loss of functionality of the front left seatbelt pretensioner.

2. What does the OBDII code B1907 "Short to Ground in Front Pretensioner Squib Left Circuit" mean for a 2013 Toyota RAV4?

This code indicates a detected short circuit to ground in the front pretensioner squib left circuit of the airbag system in the vehicle.

3. What are some possible causes of OBDII code B1907 in a 2013 Toyota RAV4?

Possible causes of code B1907 include damaged wiring in the front left pretensioner squib circuit, a faulty pretensioner squib, or a problem with the airbag control module.

4. How can I diagnose the OBDII code B1907 in my 2013 Toyota RAV4?

Diagnosing code B1907 typically involves inspecting the wiring harness, connectors, and components in the front left pretensioner squib circuit, as well as using a diagnostic scan tool to retrieve and interpret the fault codes.

5. Is it safe to drive my 2013 Toyota RAV4 with OBDII code B1907 active?

It is not recommended to drive the vehicle with an active B1907 code, as it indicates a potential issue with the airbag system that could affect its operation in the event of a collision.

6. How can I repair OBDII code B1907 in my 2013 Toyota RAV4?

Repairing code B1907 may involve repairing or replacing damaged wiring, connectors, or components in the front left pretensioner squib circuit, as well as clearing the fault codes with a diagnostic tool.

7. Can I reset the OBDII code B1907 in my 2013 Toyota RAV4 by disconnecting the battery?

While disconnecting the battery may reset some fault codes, it is recommended to diagnose and repair the underlying issue causing code B1907 before attempting to clear the code.

8. Are there any recalls or service bulletins related to OBDII code B1907 in the 2013 Toyota RAV4?

It is advisable to check with a Toyota dealership or the manufacturer's website for any recalls or service bulletins related to code B1907 in the 2013 RAV4 model.

9. How much does it typically cost to fix OBDII code B1907 in a 2013 Toyota RAV4?

The cost of fixing code B1907 can vary depending on the specific cause of the issue, but it may involve labor costs for diagnosis and repair, as well as potential expenses for new parts or components.

10. Can I clear the OBDII code B1907 in my 2013 Toyota RAV4 using a generic OBDII scanner?

While a generic OBDII scanner may be able to read and clear some fault codes, it is recommended to use a more advanced diagnostic tool capable of accessing the specific airbag system codes in the Toyota RAV4 for accurate diagnosis and clearing of code B1907.