B1905 KIA Code - Rain Sensor Fault 1
Quick Answer
The Front Area Module (FAM) controls the low/high wiper relay according to rain sensor signal when the wiper auto switch is turned to ON under IG ON. Common causes include Faulty Rain Sensor, Rain Sensor harness is open or shorted, Rain Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1905 KIA indicates Rain Sensor Fault 1.
- Common causes
- Common causes include Faulty Rain Sensor, Rain Sensor harness is open or shorted, Rain Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1905 KIA Description
What are the Possible Causes of the DTC B1905 KIA?
- Faulty Rain Sensor
- Rain Sensor harness is open or shorted
- Rain Sensor circuit poor electrical connection
- Faulty Front Area Module (FAM)
How to Fix the DTC B1905 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1905 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1905 KIA code?
Need more information on how to fix the B1905 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1905 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1905 KIA Code
1. What are the common symptoms of OBDII code B1905 KIA (Rain Sensor Fault 1)?
Possible symptoms include the windshield wipers not working properly in response to rain, the rain sensor not functioning correctly, or a warning light on the dashboard indicating an issue with the rain sensor.
2. What are some possible causes of OBDII code B1905 KIA (Rain Sensor Fault 1)?
Potential causes of this code include a faulty rain sensor, damaged wiring or connectors related to the rain sensor, or a problem with the vehicle's control module that manages the rain sensor function.
3. How can I diagnose the OBDII code B1905 KIA (Rain Sensor Fault 1)?
Diagnosing this code typically involves checking the rain sensor for physical damage, inspecting the wiring and connectors for any signs of wear or corrosion, and using a diagnostic tool to scan the vehicle's control module for specific error codes related to the rain sensor.
4. Is it safe to drive with OBDII code B1905 KIA (Rain Sensor Fault 1) present?
While the vehicle may still be operable with this code, it is recommended to address the issue promptly to ensure the rain sensor functions correctly for optimal visibility and safety, especially in inclement weather conditions.
5. Can I repair OBDII code B1905 KIA (Rain Sensor Fault 1) on my own?
Depending on your level of automotive expertise, you may be able to address this issue on your own by inspecting the rain sensor, wiring, and connectors for any visible problems. However, if you are unsure or if the issue persists, it is advisable to seek professional assistance.
6. Are there any simple tips for troubleshooting OBDII code B1905 KIA (Rain Sensor Fault 1)?
One simple tip is to first check the rain sensor for any obstructions, such as dirt or debris, that may be affecting its functionality. Additionally, ensuring that the windshield is clean and free of any contaminants can help improve sensor performance.
7. How much does it typically cost to repair OBDII code B1905 KIA (Rain Sensor Fault 1)?
The cost of repairing this code can vary depending on the specific cause of the issue, labor rates in your area, and the need for any replacement parts. It is recommended to obtain quotes from reputable automotive shops for an accurate estimate.
8. Can a rain sensor fault affect other vehicle systems?
While the primary function of the rain sensor is to control the windshield wipers based on moisture levels, a fault in this system may also impact related systems such as automatic headlight controls or climate control settings that rely on accurate environmental data.
9. How long does it typically take to repair OBDII code B1905 KIA (Rain Sensor Fault 1)?
The repair time for this code can vary depending on the complexity of the underlying issue and the availability of replacement parts. In some cases, the repair may be completed within a few hours, while more extensive repairs may take longer.
10. Is it necessary to reset the OBDII system after repairing OBDII code B1905 KIA (Rain Sensor Fault 1)?
After repairing the issue causing this code, it is recommended to reset the OBDII system using a diagnostic tool to clear the error code and ensure that the rain sensor functions properly without any remaining faults.
Discuss the causes and fixes for B1905 KIA OBDII Code
Code B1905 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
