B1903 2016 Toyota RAV4 Code - Short to Positive in Front Pretensioner Squib Right Circuit
Quick Answer
The Front Pretensioner Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Outer Belt Assembly Right (RH). Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1903 2016 Toyota RAV4 indicates Short to Positive in Front Pretensioner Squib Right Circuit.
- Common causes
- Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1903 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC B1903 2016 Toyota RAV4?
- Faulty Front Seat Outer Belt Assembly Right (RH) (Front Pretensioner Squib Right)
- Front Seat Outer Belt Assembly Right harness is open or shorted
- Front Seat Outer Belt Assembly Right circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1903 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1903 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1903 2016 Toyota RAV4 code?
Need more information on how to fix the B1903 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1903 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1903 2016 Toyota RAV4 Code
1. What does the OBDII code B1903 mean in a 2016 Toyota RAV4?
The code B1903 indicates a "Short to Positive in Front Pretensioner Squib Right Circuit," meaning there’s an electrical issue in the passenger-side seatbelt pretensioner circuit.
2. What are the common symptoms of code B1903 in a 2016 Toyota RAV4?
The most common symptom is the airbag warning light illuminating on the dashboard, indicating a fault in the Supplemental Restraint System (SRS).
3. What causes the B1903 code in a 2016 Toyota RAV4?
The code is usually caused by a short circuit in the wiring, a faulty seatbelt pretensioner, a damaged connector, or an issue with the SRS control module.
4. Can I drive my 2016 Toyota RAV4 with the B1903 code active?
It’s not recommended to drive with the B1903 code active, as it can indicate a malfunction in the SRS system, which may prevent airbags and seatbelt pretensioners from functioning properly in an accident.
5. How do I diagnose the B1903 code in a 2016 Toyota RAV4?
Diagnosis involves inspecting the wiring and connectors for damage, testing the resistance of the pretensioner circuit, and using a scan tool to confirm the fault.
6. How is the B1903 code typically fixed in a 2016 Toyota RAV4?
Repairs can include replacing damaged wiring, repairing or replacing the seatbelt pretensioner, or resetting the SRS system after resolving the issue.
7. Can a faulty airbag control module cause the B1903 code?
Yes, a malfunctioning airbag (SRS) control module can sometimes cause the B1903 code, though it’s less common compared to wiring or pretensioner issues.
8. How much does it cost to repair the B1903 code in a 2016 Toyota RAV4?
Repair costs can vary but typically range from $100 to $600, depending on whether the issue is with wiring, connectors, or the pretensioner assembly itself.
9. Can I clear the B1903 code without fixing the issue?
Clearing the code without addressing the root cause is not recommended, as the airbag system may still be compromised and the code is likely to return.
10. Do I need a professional mechanic to fix the B1903 code?
While some basic checks like inspecting connectors can be done by a knowledgeable DIYer, it’s best to have a professional diagnose and repair the SRS system due to its critical safety function.
Discuss the causes and fixes for B1903 2016 Toyota RAV4 OBDII Code
Code B1903 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
